Windows 10: BSOD constantly

So this has been happening for awhile I have an MSI laptop that I use everyday that has a messed up touchpad, I have it disabled. Even uninstalled the drivers. Today I’m getting a cycle of blue screens constantly and don’t know what to do. Did a fresh install of windows 10, ran some updates, Boom again, on boot up blue screen. Getting it from the SynTP.sys and I just can’t get rid of it. I don’t even have synaptics stuff in my device anymore. Once I wiped the device, I didn’t get any errors until I did a windows update. This happened before and i paused updates but I just can’t seem to avoid this, any help???? Literally booting to the bsod as I speak.

submitted by /u/Czrvation
[link] [comments]

:)

 

Random BSOD while browsing internet


BitDefender is nothing special. mwac.sys causes BSODs anywhere.
A tiny documentation can be found here: Solved Random BSODs - Windows 10 Forums
In that very thread, the suggested action apparently worked.

The storage and network filters of any third party antivirus can cause BSODs. Neither MBAM nor BitDefender is any special. For a regular antivirus, it may be shifted to an alternative; but MBAM has no alternative. So a clean install of the said program is the most feasible first step.
As far as the first step is not failing, it is better to not think for the second step. Because the BSODs are not universal, failure at the first step is not universal; and success at the second step is also not universal.
That is why I posted that my suggestion may work, or may not. Let us see where it goes.

 

Computer BSOD and freeze constantly

Hi,

I'm Mohammed Shuaib, an Independent Advisor & I understand from the description that your facing BSOD errors, please try the below methods one by one to fix the issue.

Method #1

Step 1:

Go to search box next to Windows icon

Step 2:

Search for Command Prompt, right-click, and select the Run as administrator option.

Step 3:

Type msdt.exe -id DeviceDiagnostic & press Enter

Method # 2

Step 1:

Go to Search box next windows icon

Step 2:

Search for Command Prompt, right-click, and select the Run as administrator option.

Step 3:

Type the following command and press Enter:

SFC /scannow

Method#3: Check drivers

Make sure there are no errors or yellow exclamations marks in device manager

To do so, follow these steps:

Go to search box next to Windows icon

Type Device Manager in the search box

Determine if there are any corrupt drivers installed (any errors reported) from the list of drivers installed. If there are no errors reported in Device Manager, update the software of your most recently installed driver. To do so, expand & right-click on the
list of devices shown under and click Update Driver.

Method #4: Run chkdsk or Windows Memory Diagnostic

To troubleshoot if the BSOD is caused by failing hard drive or memory, you can run the following tools:

chkdsk

Windows Memory Diagnostic

To run chkdsk, follow these steps:

Press the Windows and C keys to open Charm Bar

Type cmd in the search box

Right-click on Command Prompt from the results list

Click Run as Administrator

Once Command Prompt has loaded, type:

chkdsk C: /f

Replace C: with the letter of the drive where your Windows is installed.

To run Windows Memory Diagnostic, follow these steps:

Press the Windows and C keys to open the search box from Charm Bar

Type Windows Memory Diagnostic in the search box

Click on Windows Memory Diagnostic from the search results list

Continue with the Windows Memory Diagnostic wizard to complete the process and wait for the results

Method #5: Disable overclocking from BIOS

In order to fix the BSOD errors on Windows 10 systems, make sure the Overclocking feature from your computer’s BIOS is disabled.

To do so, follow these methods to open BIOS.

Method #1: Complete shutdown

Switch to login screen

Hold the Shift key while also pressing the Shutdown button

Select Restart

After your computer restarted, it should open into the BIOS menu automatically:

Go to Advanced tab

Go to Performance

Look for a Overclocking option

Make sure it’s disabled

If it’s enabled, disable it

Save the settings and exit BIOS by hitting the F10 key. Choose Yes if you’re asked to exit with saving the changes

Regards

Shuaib

Independent Advisor

 

7 different BSoD

Hey guys,

I have a serious problem. I make it as short as possible:

• system runs 100 % fine with the 10.12
• updatet to Catalyst 11.1 -> BSoD
• updatet to 11.1 Hotfix -> BSoD
• rollback to 10.12 -> BSoD
• removed ALL AMD files manually, installed 10.12 -> BSoD

• Temps are fine
• no sfc /scannow errors
• no chkdsk errors
• Prime, Furmark all fine
• regardless what driver I install -> BSoD
• I did no hw changes, no OC

Here are my BSoDs I receive:

• 0x0000010e
• 0x1000007e
• 0x0000007e
• 0x0000004e
• 0x0000003b
• dxgmms1.sys
• PFN_LIST_CORRUPT

They all refer to the GPU of course ...

From now on I receive a BSoD every time I try to play a game (especially BC2 and SC II) even if I completely remove the old driver and make a clean install.
Apparently the 11.1 damaged my system irreparable.

Any advice or info would be very much appreciated *Smile