Windows 10: BSOD debug help

I've been having BSOD recently, with about 2 per day in average.I've pasted the dump info of the latest one here below. Please help to provide some insights.Thanks a lot!******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* KERNEL_SECURITY_CHECK_FAILURE

:)

 

Debugging BOSD and need help understanding bug

Please perform the following steps: (in sequence)

1) Move the page file from E: to C:

2) Reboot

3) Make sure that C: has > 30 GB free space during the troubleshooting

4) Run Tuneup plus > post a share link

https://www.tenforums.com/attachmen...-files-use-bsod-debugging-tuneup_plus_log.zip

https://www.tenforums.com/bsod-cras...h-files-use-bsod-debugging-2.html#post2177966

https://www.tenforums.com/bsod-crashes-debugging/162488-batch-files-use-bsod-debugging.html#Part3

5) Make a new restore point:

https://www.tenforums.com/tutorials/4571-create-system-restore-point-windows-10-a.html

6) The BIOS Version/Date American Megatrends Inc. 2603, 05-Aug-19

Upgrade the BIOS: 2603 > 3006

PRIME Z390M-PLUS｜Motherboards｜ASUS Global

7) List all hardware connected to USB ports

8) After the next BSOD search for C:\WINDOWS\MEMORY.DMP > save to the downloads folder > zip > post a share link with only the zipped memory dump (only a zipped memory dump)

 

Help needed for periodic BSODs on MSI laptop

I believe I ran this hard drive scan yesterday and nothing out of the ordinary showed up in the benchmark, no bad sectors.. I will test it again and post the results. I will also post the results of memtest, I left it while I went to work so hopefully it has not booted to Windows while I was out - - - Updated - - - I have completed the tests First pass of memtest86



Second pass





And the results from HDTune which for some reason does not show the health of the OS drive

 

Ethernet is showing as Kernel Debug Network Adapater

Hi,



Thank you for writing to Microsoft Community Forums.



I understand that you see Kernel Debug Network Adapter in Device Manager. This can happen if debugging is turner on. I would suggest you to turn off debugging by following the steps mentioned below:

1. Type command prompt in the search bar on the
   Taskbar.
   
2. Right click on the command prompt icon and select
   Run as administrator.
   
3. Paste the following commands and hit Enter:
   
   bcdedit /debug off
   

If you still see the Network Adapter, you can disable it from Device Manager without problems. Refer the steps mentioned below:

1. Press Windows Logo key + X, to open
   Device Manager.
   
2. Expand Network adapters.
   
3. Now, right click on the Kernel Debug adapter and select
   Disable device.
   

Let us know how it goes.



Regards,

Nikhar Khare

Microsoft Community - Moderator