Windows 10: BSOD driver issue

Got a BSOD need some help to see whats wrong here is the dump BSOD driver_irql_not_less_or_equal ntoskrnl.exehttps://drive.google.com/file/d/1S0zLK1BTno1BJbb6rIcgf18D8Uqr3O7-/view?usp=drive_linkalso have had a kernel security check failure did a memtest64 and passed just fine

:)

 

BSOD- atikmpag.sys

This is most likely due to an installation/upgrade error with ATI driver's. I suggest doing DriveSweeper and the following:

• Drivesweeper all drivers & in Safe Mode
• Unistall all drivers that aren't used in DriveSweeper (CCC Profiler Updates, MSI AfterBurner, anything related to ATI that use's it's drivers.)
• After you do this, the first thing you need to do is go into Device Manager and Unistall your ATI Drivers

Once your done, restart the PC and then try installing the latest drivers.


I had several issues with this in the past, but I overcame it with logical reasoning and whenever I have a driver issue, I just use these steps and I always overcome the problem.

Best of luck! *Toast :toast:

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

Multiple BSOD hardware issue or driver issue ?

Hi Iriszer0,

Thank you for writing to Microsoft Community forum.

To have a better clarity on the issue and guide you accordingly, respond to the question listed below.

1. What is the make and model of the computer?

I suggest you to try the steps listed in
troubleshoot blue screen errors and check if it works.

Meanwhile you may also go through:

1. troubleshoot CRITICAL_STRUCTURE_CORRUPTION
2. troubleshoot CRITICAL_PROCESS_DIED
3. troubleshoot SYSTEM_SERVICE_EXCEPTION

Regards,