Windows 10: BSOD DRIVER_VERIFIER_DMA_VIOLATION (e6)

I have been getting this error (BSOD DRIVER_VERIFIER_DMA_VIOLATION (e6)) typically while playing video games but have seen it occur simply idling. The thing that I find strange is that I don't even have the Driver Verifier turned on. I have done the "verifier /reset" command which was one of the first things I tried to do to fix it after Googling the error. I have tried a number of things to try and fix this. A non-exhaustive list includes:

• Reinstalling GPU drivers using DDR (Display Driver Remover)
• Meticulously updating every single driver for every device
• Clean out the registry using CCleaner
• Flashing BIOS
• Ran Memtest86 (RAM stress test)
• Ran Prime95 (cpu stress test)
• chkdsk

I'm far from computer illiterate but this has me completely stumped. So I come to you, the experts, hat in hand. Please help me. You're my only hope.

:)

 

Constant BSOD. Stop code: Driver_Verifier_DMA_Violation

I regret to inform you that the BSOD has occurred again with the stop code Driver_Verifier_DMA_Violation. Would you also need the dump for that too? It is in the same folder as the others.

 

Constant BSOD. Stop code: Driver_Verifier_DMA_Violation

I have been having constant blue screens with the stop code of Driver_Verifier_DMA_Violation. I have checked in BlueScreenView and it says from the dump that the blue screen is caused by HAL.dll . Parameter 1 is "00000000`00000026".

 

E6 Venice: overclocking results

Please post only E6 Venice cores please

For the searches:
DH-E6
f-2f-2
first line ends in DAA4BW
Family: 15, Model: 47, Stepping: 2
'15' is 'F' in hexadecimal and '47' is '2F' in hexadecimal, so the 'normal' CPUID-string would be 'F-2F-2' which corresponds to a Model 2F ('Venice'), revision DH-E6

This processor has lower temps at load then the E3 but..
There has been many comments on how only a select few are getting above 2.4GHz!!!

When posting please include:

-1st line of OPN (ex: ADA3200DAA4BL)
-2nd line of OPN (ex: CBBLE 0513DPAW)
-Maximum *STABLE* overclock
-voltage used for that overclock as set in bios
-cooling type (stock, air, water or phase are your options)

*stable* - at LEAST 6 hours of prime95, preferably on small fft's combined with at least 2 hours of memtest86 to ensure memory stability.