Windows 10: BSOD error appears and vgk.sys failed

whenever I open my valorant . during match or even in lobby , my game crashes and BSOD occurs saying that SYSTEM THREAD EXCEPTION NOT HANDLED and vgk.sys failed. i have watched soo many videos but couldn't fix it. please help me fix this problem.

:)

 

BSOD while using the internet. error (L1C63x64.sys)


Hi trainman81,

Welcome to the 10forums.

Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover.

1. Uninstall Daemon Tools
2. Download the SPTD standalone installer and follow these steps:
   • Double click the executable to open it
   • Click on the button shown below

If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window


AVG is trying to request data from the internet, which is why the network driver is marked as the cause.
Code:

Code:

*** WARNING: Unable to verify timestamp for L1C63x64.sys *** ERROR: Module load completed but symbols could not be loaded for L1C63x64.sys 0: kd> lmvm L1C63x64 start             end                 module name fffff801`89700000 fffff801`89722000   L1C63x64 T (no symbols)                Loaded symbol image file: L1C63x64.sys     Image path: \SystemRoot\System32\drivers\L1C63x64.sys     Image name: L1C63x64.sys     Timestamp:        Mon Apr 01 05:15:17 2013 (5158FBC5)     CheckSum:         000245C4     ImageSize:        00022000     Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

AVG drivers that have been flagged
Code:

Code:

*** WARNING: Unable to verify timestamp for avgwfpa.sys *** ERROR: Module load completed but symbols could not be loaded for avgwfpa.sys *** WARNING: Unable to verify timestamp for avgfwd6a.sys *** ERROR: Module load completed but symbols could not be loaded for avgfwd6a.sys

Please uninstall AVG and see if it helps
Uninstall AVG | AVG
It is further recommended to check your Qualcomm network driver for updates, its driver is not supported for Windows 10.
Driver Reference Table - L1C63x64.sys

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.

 

7 different BSoD

Hey guys,

I have a serious problem. I make it as short as possible:

• system runs 100 % fine with the 10.12
• updatet to Catalyst 11.1 -> BSoD
• updatet to 11.1 Hotfix -> BSoD
• rollback to 10.12 -> BSoD
• removed ALL AMD files manually, installed 10.12 -> BSoD

• Temps are fine
• no sfc /scannow errors
• no chkdsk errors
• Prime, Furmark all fine
• regardless what driver I install -> BSoD
• I did no hw changes, no OC

Here are my BSoDs I receive:

• 0x0000010e
• 0x1000007e
• 0x0000007e
• 0x0000004e
• 0x0000003b
• dxgmms1.sys
• PFN_LIST_CORRUPT

They all refer to the GPU of course ...

From now on I receive a BSoD every time I try to play a game (especially BC2 and SC II) even if I completely remove the old driver and make a clean install.
Apparently the 11.1 damaged my system irreparable.

Any advice or info would be very much appreciated *Smile