Windows 10: BSOD Error once every few days.

Hi, I started having FAULTY_HARDWARE_CORRUPTED_PAGE BSOD from a month ago. I have not had any BSOD for the last 4 to 5 years and has only started very recently. I also have no installed any new hardware recently as well. I did some research and was told I could have a possibility of needing a new pair of rams.So I purchased a new set of rams. Did Memtest86 and result was a PASS and I am still getting the BSOD. System Info:CPU: Ryzen 5 5600xMotherboard: Asus B450M-A latest BiosRam: Corsair Vengeance RGB PRO DDR4 2x16gb / 32GB AMD optimized CMW32GX4M2Z3600C18GPU: Gigabyte Windforce RTX 4070

:)

 

BSOD - Registry Error

Your BSOD code is 0X000000051

Here's the Google search I did for it: https://www.google.com/search?q=0x0...j5.399j0j7&sourceid=chrome&es_sm=122&ie=UTF-8

There is a hotfix available that might help, https://support.microsoft.com/en-us/kb/810558

This thread makes a few good suggestions too: http://www.sevenforums.com/bsod-hel...dows-7-pro-sp1-registry-error-0x00000051.html

+1 to listing your full system specs, OS version, etc. I did only look at your BSOD log file.

Run a Diskchk /R (I know you already ran one, so you can skip this)

Run SFC /SCANNOW

Report back.

 

Several Kernel Errors within a day?


Lets get back to this troubleshooting step *Arrow Several Kernel Errors within a day? - Page 2 - Windows 10 Forums
The result was a working system in safe mode, though the GPU isn't used in safe mode.
Please perform a clean boot again, watch the temperatures at all times (if you didn't yet) and from there we'll see what needs to be done. Please do not enable anything in taskmanager & msconfig, I want you to boot without any startup items & services enabled.

What was the BSOD stop code? Based on the BSOD stop code I'll edit the suggestion in this post.

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.