Windows 10: BSOD every few weeks - various related to memory

Every few weeks I get a BSOD. It always seems to be related to memory so I occasionally run memory diagnostics, including the BIOS built-in and memtest86 (and memtest86+). It always passes the memory diagnostics. Here's a list of BSODs I've gotten, going back a year (I take a photo when it happens): Date stopcode other 2/25/2020 PAGE FAULT IN NONPAGED AREA What failed:nvlddmkm.sys 7/21/2020 MEMORY MANAGEMENT 7/28/2020 FAULTY HARDWARE CORRUPTED PAGE 9/3/2020 FAULTY HARDWARE CORRUPTED PAGE 10/25/2020 FAULTY HARDWARE CORRUPTED PAGE 12/15/2020 FAULTY HARDWARE CORRUPTED PAGE 1/12/2021 FAULTY HARDWARE CORRUPTED PAGE 1/16/2021 MEMORY MANAGEMENT 3/20/2021 CRITICAL STRUCTURE CORRUPTION 4/26/2021 FAULTY HARDWARE CORRUPTED PAGE 5/19/2021 MEMORY MANAGEMENT I tried using the log collector. Unfortunately it summarily stops & disappears after showing "Running system power report. . . " I found folders on my Desktop, apparently created by it. I have manually zipped up the most recent of those folders, but I assume it is incomplete since the process did not complete. I will appreciate any guidance, including how to get the logs collector to run through to the end. Here is my Windows version: 20H2 (OS Build 19042.985)

:)

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.

 

BSOD on Boot, various memory related messages


Please run CPU-Z | Softwares | CPUID, open it and make screenshots of the following tabs

• CPU
• Mainboard
• Memory
• SPD*
• Graphics

*SPD shows the details of each module, you can show the details by choosing different slots in the left upper corner.
Please make screenshots of each module.

Please post each screenshot in your next reply/replies.

 

BSOD "Memory Management" Stop 0x0000001A

Thanks Rohit,

The method of deleting temp-files brings me into the windows explorer program, showing the list. But when attempting to delete the list after "Ctrl-A" the BSOD is there.

No disk-related actions are possible.

The memory modules are OK.

Please help!