Windows 10: BSOD every time I use my RTX 3060 for face tracking

Whenever I use the Nvidia Brodcast Tracker feature on the software Vtube Studio, after 2-3 minutes my pc blue screens.I did a clean reinstall on my RTX 3060 using a DDU.I'm not sure if it's a driver issue or something else.Link to the minidump reports:https://drive.google.com/file/d/10NsdrXA3UzSUqv7vvx6cFps8poQGPi-B/view?usp=sharing

:)

 

RTX 3060 not detected on Win10

Hello , sorry about your problems. My name is Marco and I will do my best to help you.

Here are some solutions you can try.

Based on the information you provided, it seems that your Gigabyte H410M S2 V2 motherboard should be compatible with the Nvidia RTX 3060.

-Ensure you have the correct and updated Nvidia drivers for your GPU. You can use the Nvidia Control Panel to check if the GPU is detected

You can download NVIDIA GeForce Experience to automatically detect the correct drivers to install.

-Check your BIOS settings, especially the Resizable BAR support, which can be enabled in the BIOS. A video i found here:

Your power supply seems sufficient for the card.

The RTX 3060 has a consumption of 170 watts, but it is important to take into account the total consumption of your system, including the processor, hard drives, fans, and other peripherals.

Some users and sources suggest a 600 watt power supply for an RTX 3060 Ti, which has slightly higher power consumption than the RTX 3060.

And the fan behavior you're experiencing might be due to a fan curve issue. You can use MSI Afterburner or EVGA Precision to adjust the fan curve.

You can verify the solutions here: https://www.nvidia.com/en-us/geforce/forums/gef...

_________________________________________________

Note: This is a non-Microsoft website. The page appears to be providing accurate, safe information. Watch out for ads on the site that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised on the site before you decide to download and install it.

 

Installed new RTX 3060 Ti - Crashing while idle

I decided to open this thread back up because I got a completely new and different model of the RTX 3060 Ti and still getting hard crashes without BSOD while watching videos. My computer completely locks up making a loud buzzing sound from my headphones. I didn't have a mini dump file this time around. I've done MEMtest and everything was fine. New drivers with DDU for the graphics card.. I'm completely stumped. Not sure what to do. While I was waiting for my refund and the new card to arrive I went back to older cards and the issue wasn't happening on my 1060, 970 or Intel HD graphics. It's only with RTX 3060 Ti. I can game on the new card for hours and hours and it's completely fine. I am only running into this issue when idle or watching videos. Any suggestions would be greatly appreciated.

EDIT: Turns out it might have been Nvidia Broadcast. I was trying this out when I got the first 3060 Ti and uninstalled it when I returned the suspected faulty card and used my old card until the new one arrived. I didn't run into the BSOD issue anymore. I re-installed Nvidia Broadcast with the new 3060 Ti when it arrived and happened again. I ran driver verifier to check and it was triggering a BSOD with nvrtxvad64v.sys so I have uninstalled it completely. I will reply to this post if I still run into any issues.

 

New Nvidia RTX 3060 Ti not recognized, need help troubleshooting

Last year I got on a waiting list. In October I received two notifications at the same time. I had 48 hours to pick either the: 1) ASUS GeForce RTX 3060 Ti Republic of Gamers Strix V2 OC 2) ASUS GeForce RTX 3060 TUF GAMING V2 OC I chose the RTX 3060 Ti and paid $650 USD. I could have bought the card anytime elsewhere but there was no way I was going to pay the buy now price then of $1000-$1100 USD.