Windows 10: BSOD Help.

Well if you installed the RAM with the four sticks in the normal way, you should have it like this:
slot 1: cmx8
slot 2: cmx16
slot 3: empty(the one you removed)
slot 4: cmx16

But I don't know since I can't see the setup.

 

Well, when I removed the bad one which brought me down to 3 I put the one from the fourth slot into the 3rd slot (the bad ones slot) as one to verify if it itself was good, and to make sure that the slot itself wasn't bad, you know? I removed slot one, and put the other 2 side by side the slot one (different card) was the same model but a 1600 the others are 1333

 

Okay, so I removed the slot 1 1600 and put the two 1333 side by side, slot 1 and 2 now to test the hard drive, what do I do? If I google driver verifier is that what I need?

 

You mean side by side as in the sticks in slot 1 and 2 and not slot 1 and 3 or 2 and 4?

 

A picture's worth a thousand words.. I never really knew if they were supposed to be directly next to each other or matching colored slots, I guess you guys will let me know. Apparently the picture is too big, but they're literally in the slots next to each other, not same color, if that matters? According to CPUID in SPD they're in slots 1 and 2. Also, I opened command prompt as admin, ran verifier, clicked verify all drivers, and like 3 minutes later BSOD'd again with PAGE_FAULT_IN_NONPAGED_AREA (NTFS.sys), should I upload that dmp file? I then upon reboot typed verifier / reset 9i googled the driver verifier and microsofts page showed me)

 

The sticks should be in the same color slots, when that is done test your system without driver verifier and let us know how it goes *Smile

 

When you say test my system, do you mean, just continue my daily things, or run memtest86? Either way I get the feeling it'll have a BSOD again, but either way you guys are doing your best to help so I'm very appreciative.

 

Do your daily thing *Wink

 

Alright, if it bluescreens again, I'll let you guys know, but question, what do you think causes that last BSOD I got like ten fifteen minutes ago? The PAGE_FAULT_IN_NONPAGED_AREA (NTFS.sys)? So, I have to reinstall windows ten, and the crashes wiped out my restore folder, SO i downloaded the mediacreation tool and am reinstalling that way from my USB drive, now It's not going to be pro 64 because they lowered the options so I guess just windows to home 64 but oh well not to big a difference I guess. when everything's done and updated, I'll run the dm log and see if it works, and if the BSOD's are still going on or not.

 

Can't say without a dump

 

So bad news, reinstalling windows 10, but getting bsods during reinstall first was IRQL_NOT_LESS_OR_EQUAL Second was DRIVER_IRQL_NOT_LESS_OR EQUAL in usbstor.sys (I'm installing from a USB drive... I don't know if it matters. I'm starting to think my hard drive is failing what else would cause these issues? I fully formatted the hard drive since it wouldn't let me reinstall the os otherwise, now I just hope it will fully reinstall and work without BSOD, And if I can get it to launch that'll be friggin amazing.

 

USB drivers have nothing to do with the hard drive.
What else causes it can't be said without dump, again.

 

Good news, I finally managed to get the system to reinstall, so now I'm installing things and up dating everything, will let you know if I crash again, but even if not when everything's done I'm gonna use the DM-log and before I did a system restore I backed up my dump folder, SO you'll get everything!
Okay. so I'm not going to install my games except for one, until 2 days from now (if two days pass without a BSOD including while I play the one game I do install) I'll reinstall it all. I was actually able to run the dm log tool, so I'm uploading now so you guys can browse through it to look for any possible problems or conflicts, I'm going to leave my system as is for atleast 2 days, without downloading anything else, so NOTHING the dm log tool created should be different for the next few days... Finally we're getting somewhere.

 

You've seated a wrong module.
Code: [Memory Device (Type 17) - Length 34 - Handle 002ch] Physical Memory Array Handle 002ah Memory Error Info Handle [Not Provided] Total Width 64 bits Data Width 64 bits Size 8192MB Form Factor 09h - DIMM Device Set [None] Device Locator DIMM0 Bank Locator BANK0 Memory Type 18h - Specification Reserved Type Detail 4080h - Synchronous Speed 1333MHz Manufacturer Corsair Serial Number Asset Tag Number Part Number CMX8GX3M1A1600C11 [Memory Device (Type 17) - Length 34 - Handle 0030h] Physical Memory Array Handle 002ah Memory Error Info Handle [Not Provided] Total Width 64 bits Data Width 64 bits Size 8192MB Form Factor 09h - DIMM Device Set [None] Device Locator DIMM2 Bank Locator BANK2 Memory Type 18h - Specification Reserved Type Detail 4080h - Synchronous Speed 1333MHz Manufacturer Corsair Serial Number Asset Tag Number Part Number CMX16GX3M2A1333C9[/quote]

 

[/quote] That one might be old mate, I took the only 1600 out earlier.

Yeah the file you're in must be an older one, I ran CPUID and went to SPD and checked slots 1 and 3 and they're both CMX16GX3M2A1333C9