Windows 10: BSOD HID COMPLIANT HEADSEAT

Hello there,


Since several month, I got a lot of BSOD.


I thought it was cuz of my Hyper X Cloud 2 Headset so I changed with a Logitech X PRO, but got the same errors.


Here is my whocrashed file :


On Sat 11/04/2020 13:42:58 your computer crashed or a problem was reported


crash dump file: C:\Windows\Minidump\041120-9718-01.dmp
This was probably caused by the following module: ntoskrnl.exe nt+0x1C2360
Bugcheck code: 0x1 0xFFFFF804386350F0, 0x0, 0xE591, 0x1
Error: APC_INDEX_MISMATCH
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that there has been a mismatch in the APC state index.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Sat 11/04/2020 13:42:58 your computer crashed or a problem was reported
crash dump file: C:\Windows\MEMORY.DMP
This was probably caused by the following module: ntkrnlmp.exe nt!memset+0x810F7
Bugcheck code: 0x1 0xFFFFF804386350F0, 0x0, 0xE591, 0x1
Error: APC_INDEX_MISMATCH
Bug check description: This indicates that there has been a mismatch in the APC state index.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Sat 11/04/2020 13:05:42 your computer crashed or a problem was reported
crash dump file: C:\Windows\Minidump\041120-14312-01.dmp
This was probably caused by the following module: ntoskrnl.exe nt+0x1C2360
Bugcheck code: 0x139 0x2, 0xFFFFF9857E57F710, 0xFFFFF9857E57F668, 0x0
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.


I've my HID COMPLIANT HEADSET with a yellow warning in my device manager.

All my driver are updated.

I already tried a newly Windows installation. Same Problem.


Can you please help ?


:)

 

driver for hid touchscreen compliant

Unfortunately , for the last several months all the suggestions listed I have tried. The realization is that the hid compliant touchscreen is not there anymore under the human interface devices or any where else. Which means there should be a driver
for firmware that actually downloads to someone's computer to get the touchscreen back. which is what is needed you. I followed the directions and the hid compliant touchscreen disappeared. My question is if there is software, firmware, driver or what
ever that can be directly sent to download to my computer to get hid compliant touchscreen back to the device manager.

 

HID Compliant mouse problems

Since the Creators update when I restart my PC the mouse moves to the top of the screen. It just moves on its own power. I have to unplug both my G35 headset and my X52 HOTAS from there I have to go to Device Manager and remove the 2 HID compliant mouses. Then I can plug them both back in and everything works ok. I also have a Logitech Wireless mouse that shows in the Device Manager and I leave that one running. I hope this gets fixed soon. It's a pain in the *** to have to go through this after every restart. I downloaded the latest Logitech drivers but they were no help. I really don't understand why I get 2 separate HID compliant mouses as well as the Logitech mouse in the Device Manager. Any suggestions?

 

HID-compliant mouse. Device Status:This device cannot start. (Code 10)

Have you tried updating the driver for the HID-compliant mouse?

Follow these steps on how to update the driver:

To do this, follow these steps:

• In Device Manager, click the Driver tab in the device's Properties dialog box.
• Click Update Driver to start the Hardware Update Wizard.
• Follow the instructions to update the driver.

If that does not work, we suggest you contact the manufacturer of your laptop directly and ask for updated drivers for Windows 10.

Regards.