Windows 10: BSOD in Desktop

I have make a chkdsk /r to c:.

i see that most the time it show:
"Cleaning up 81 unused index entries from index $SII of file 0x9.
Cleaning up 81 unused index entries from index $SDH of file 0x9."


Is it normal, may have to be a SSD ?
Sorry so many questions *Nerd

 

The spin retry count is the total amount of spin start attempts to reach the fully operational speed.
The higher the data is the worse the mechanism of the drive becomes, if the data increases it indicates the the hard drive mechanism is failing meaning that you need to replace the hard drive.

The deleted entries are (1)security (2)descriptors, 2 links added for the security descriptor explanation, 1 securable objects, 2 security descriptor.
Yes it is normal for each partition with a letter that security descriptors are deleted with a chkdsk.

 

There it is, another BSOD, when startup the PC, even before it's show windows desktop.

 

The only thing noticeable is the reference to the Windows USB drivers indicating.
I also noticed different RAM sizes what isn't usual for memory kits, if you're running multiple memory models/makes please remove either because it may cause problems.

Besides mouse & keyboard, do you have other USB devices attached?

 

well, USB i have one printer (allways turn off when have BSOD) my default soundcard Edirol Roland UA-4fx, the speaker's logitech, mouse and keyboard.
And yes i have diferent models/brands of memory stick.

 

I would ask that you follow below suggestions:
1. Update all drivers from USB devices,
2. After updating them, remove as much USB devices as possible, usually is this every single one of them except for mouse & keyboard,
3. Update the USB drivers ASUS provides or reinstall them, they are either part of the chipset or standalone.

 

I have update, or better, install the driver's for the keyboard and mouse, because i always use the driver's that windows give us.
Before this instalation , again on turn on the pc, another BSOD, before it get to windows desktop.

Now i have install the mouse and keyboard, the sound card (Edirol UA-4fx) and the speaker's (logitech) say (in their official page) that there is no need software, windows 10 will install it, so there is no software to download.

The asus USB driver's for my board, there is no support for Win10, not even for Win8.
What should i do ?

ASUS Portugal

 

There is one for Windows 7, but most likely too old for Windows 10 giving more problems.

My current thoughts are:
- We're facing a cause without a proper solution, incompatibility with the only solution being reverting back to a previous OS.
- Mixed memory, I can't verify this as the information I can see is not enough but IME mixed memory can cause a hell of problems.
The information I get, basically the same as in your 'My System Specs'
Code: [Memory Device (Type 17) - Length 27 - Handle 003ch] Physical Memory Array Handle 003ah Memory Error Info Handle [Not Provided] Total Width 64 bits Data Width 64 bits Size 1024MB Form Factor 09h - DIMM Device Set [None] Device Locator DIMM0 Bank Locator BANK0 Memory Type 12h - DDR Type Detail 0080h - Synchronous Speed 1066MHz Manufacturer Manufacturer0 Serial Number Asset Tag Number Part Number PartNum0 [Memory Device (Type 17) - Length 27 - Handle 003eh] Physical Memory Array Handle 003ah Memory Error Info Handle [Not Provided] Total Width 64 bits Data Width 64 bits Size 2048MB Form Factor 09h - DIMM Device Set [None] Device Locator DIMM1 Bank Locator BANK1 Memory Type 12h - DDR Type Detail 0080h - Synchronous Speed 1066MHz Manufacturer Manufacturer1 Serial Number Asset Tag Number Part Number PartNum1 [Memory Device (Type 17) - Length 27 - Handle 0040h] Physical Memory Array Handle 003ah Memory Error Info Handle [Not Provided] Total Width 64 bits Data Width 64 bits Size 1024MB Form Factor 09h - DIMM Device Set [None] Device Locator DIMM2 Bank Locator BANK2 Memory Type 12h - DDR Type Detail 0080h - Synchronous Speed 1066MHz Manufacturer Manufacturer2 Serial Number Asset Tag Number Part Number PartNum2 [Memory Device (Type 17) - Length 27 - Handle 0042h] Physical Memory Array Handle 003ah Memory Error Info Handle [Not Provided] Total Width 64 bits Data Width 64 bits Size 2048MB Form Factor 09h - DIMM Device Set [None] Device Locator DIMM3 Bank Locator BANK3 Memory Type 12h - DDR Type Detail 0080h - Synchronous Speed 1066MHz Manufacturer Manufacturer3 Serial Number Asset Tag Number Part Number PartNum3[/quote] Please run CPU-Z | Softwares | CPUID, open it and make screenshots of the following tabs

• CPU
• Mainboard
• Memory
• SPD*
• Graphics

*SPD shows the details of each stick, you can show the details by choosing different slots in the left upper corner.
Please make screenshots of each stick.

Please post each screenshot in your next reply/replies.

 

ok, thank you again for all your work!

 

Please remove the Team Group Inc. memory sticks for testing, if it doesn't improve then we might be facing compatibility issues.

 

ok , i will do that.
Today have another BSOD. I have the USB connect , mouse, keyboard, and Edirol soundcard.
When restart from that BSOD, it show another blue screen, but diferent, do not show that percentage grow, 50% etc, and say something like this, : ( windows cannot start, please restart ) so i think it did not create dump file.

Then when restart again, windows start in big letter's, low resolution, with this error. it's not the first time.

It's in portuguese but say something like this " there is no graphic drivers from AMD install or they are not work ok.
Install the proper AMD driver for the hardware"

 

I can't remember to have given a display uninstall suggestion for some time in this thread. I assume this message showed up without uninstalling the drivers?

 

Yes Axe0 it's true, i did not unistall amd driver's. But even if i unistall it accidentally, windows will never give this error, or any error.
In this Thread, i think i have talk about this, this is not the first time that append. when this append i now that if i restart pc, will fix the "low resolution" and the error message, and windows start "normal".
That is why in first i thought that maybe could be the graphic card problem.

Today on start pc, i have 3 BSOD before see the desktop after windows logotip.
One is that without percentage like show first image below.
The second image is from third BSOD, the first BSOD say " IRQL NOT LESS OR EQUAL"

 

Hi again.
I hope you read my last post.

Today, again on start up pc, another BSOD before see the windows desktop.
USB i have only keyboard, mouse, soundcard edirol.
Ram i have all the 6GB.

Now *before post this* i have remove the Team Group 1GB x2 memory sticks like you said.
lets see what append

 

What was the situation with the GPU? You never mentioned if seating the GPU in a different system or trying another GPU helped *Smile

Code: ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* BugCheck 1E, {ffffffffc0000005, fffff800bcd0afe0, 1, 105} *** WARNING: Unable to verify timestamp for atikmdag.sys *** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys[/quote] I'm seriously thinking your system is not in the mood (to say it nice *Smile) for Windows 10 10586 <your Windows version>