Windows 10: BSOD kernel error bugcheck code 292 and bugcheck code 0

Hey. My computer reboots during startup when the OS starts.

It reboots turns off completely and starts up again cyclically 3-6 times, and then starts normally.

I have changed the power supply and CR2032 battery. The problem appears only if the computer has

been off for more than 30 minutes since the last start. I am attaching xml.


Also here's memory.dmp link: https://drive.google.com/file/d/1h3KbUjNk5s6esaGXy3KTmWd_xmas4bHH/view?usp=sharing

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331c3b3a-2005-44c2-ac5e-77220c37d6b4}" />
<EventID>41</EventID>
<Version>8</Version>
<Level>1</Level>
<Task>63</Task>
<Opcode>0</Opcode>
<Keywords>0x8000400000000002</Keywords>
<TimeCreated SystemTime="2020-08-19T13:03:58.7024063Z" />
<EventRecordID>7162</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="8" />
<Channel>System</Channel>
<Computer>DESKTOP-S8AH631</Computer>
<Security UserID="S-1-5-18" />
</System>
- <EventData>
<Data Name="BugcheckCode">292</Data>
<Data Name="BugcheckParameter1">0x0</Data>
<Data Name="BugcheckParameter2">0xffffa9854cf7d028</Data>
<Data Name="BugcheckParameter3">0xbe200000</Data>
<Data Name="BugcheckParameter4">0x5110a</Data>
<Data Name="SleepInProgress">0</Data>
<Data Name="PowerButtonTimestamp">0</Data>
<Data Name="BootAppStatus">0</Data>
<Data Name="Checkpoint">0</Data>
<Data Name="ConnectedStandbyInProgress">false</Data>
<Data Name="SystemSleepTransitionsToOn">0</Data>
<Data Name="CsEntryScenarioInstanceId">0</Data>
<Data Name="BugcheckInfoFromEFI">false</Data>
<Data Name="CheckpointStatus">0</Data>
<Data Name="CsEntryScenarioInstanceIdV2">0</Data>
<Data Name="LongPowerButtonPressDetected">false</Data>
</EventData>

</Event>


-----------------------------------------------------------------------

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331c3b3a-2005-44c2-ac5e-77220c37d6b4}" />
<EventID>41</EventID>
<Version>8</Version>
<Level>1</Level>
<Task>63</Task>
<Opcode>0</Opcode>
<Keywords>0x8000400000000002</Keywords>
<TimeCreated SystemTime="2020-08-19T10:00:45.7899046Z" />
<EventRecordID>7084</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="8" />
<Channel>System</Channel>
<Computer>DESKTOP-S8AH631</Computer>
<Security UserID="S-1-5-18" />
</System>
- <EventData>
<Data Name="BugcheckCode">0</Data>
<Data Name="BugcheckParameter1">0x0</Data>
<Data Name="BugcheckParameter2">0x0</Data>
<Data Name="BugcheckParameter3">0x0</Data>
<Data Name="BugcheckParameter4">0x0</Data>
<Data Name="SleepInProgress">0</Data>
<Data Name="PowerButtonTimestamp">0</Data>
<Data Name="BootAppStatus">0</Data>
<Data Name="Checkpoint">0</Data>
<Data Name="ConnectedStandbyInProgress">false</Data>
<Data Name="SystemSleepTransitionsToOn">0</Data>
<Data Name="CsEntryScenarioInstanceId">0</Data>
<Data Name="BugcheckInfoFromEFI">false</Data>
<Data Name="CheckpointStatus">0</Data>
<Data Name="CsEntryScenarioInstanceIdV2">0</Data>
<Data Name="LongPowerButtonPressDetected">false</Data>
</EventData>
</Event>

:)

 

Windows10 Kernel-Power 41 / Bugcheck 292 Error Issue

thank you!

Just run a 2h HW test with the "Lenovo Solution Center" Diagnosis Tool without any error, all components (CPU, memory, harddisk etc) looking good.

Nevertheless 15 minutes later again screen freeze followed by screen freeze, looking into event reporting its Kernel-Power 41/Bugcheck 292 error. I uploaded the new minidump to the OneDrive for you.

see you tomorrow,

Peter

 

(BSOD) bugcheck was: 0x000000a0 INTERNAL_POWER_ERROR

Has any one got this BSOD when stress testing a overclock before? i can get the minidump if some one can read it for me i was trying for 4.5Ghz @ 1.31v and after around 20min of stressing i would get this BSOD and it would shut my system down not even sure i saw a BSOD just a shutdown?

 

BSOD Crashes bugchecks




Warning Programs that claim to update your drivers install either the wrong or corrupted drivers.
If you have installed any driver with Driver Booster 3, please remove them as it may cause trouble.
It is best that you remove IObit software and use a restore point to revert back their changes.

I would also suggest that you remove Norton and Networkx seeing they have caused some crashes.
Code:

Code:

******************************************************************************* *                                                                             * *                        Bugcheck Analysis                                    * *                                                                             * *******************************************************************************  Use !analyze -v to get detailed debugging information.  BugCheck 133, {1, 1e00, 0, 0}  *** WARNING: Unable to verify timestamp for networx.sys *** ERROR: Module load completed but symbols could not be loaded for networx.sys Probably caused by : tdx.sys ( tdx!TdxSendDatagramTransportAddress+420 )  Followup:     MachineOwner ---------   ******************************************************************************* *                                                                             * *                        Bugcheck Analysis                                    * *                                                                             * *******************************************************************************  Use !analyze -v to get detailed debugging information.  BugCheck 19, {e, ffffd000219bb340, ffffe002020fd010, bd6ca4a877952118}  *** WARNING: Unable to verify timestamp for SRTSP64.SYS *** ERROR: Module load completed but symbols could not be loaded for SRTSP64.SYS Probably caused by : Pool_Corruption ( Processing initial command '!analyze -v; !sysinfo smbios; !sysinfo machineid; !sysinfo cpuspeed; !thread; .bugcheck; .time;' nt!ExFreePool+783 )  Followup:     Pool_corruption