Windows 10: BSOD Kernel Security Check Failure (ntoskrnl.exe)

I built this computer and even from its first bootup it has given me problems.
-first i had bad memory 2 sticks of mushkin DDR3 2400 Blackline.
-then windows would not want to install GTA V, because of bad memory.
-NOW everything runs fine, but whenever im browsing the internet it throws up random BSODs with the kernel security check failure error with ntoskrnl.exe as the culprit according to who crashed.

PLS help.

Attachment 35754

:)

 

Windows 10 BSOD - SYSTEM_SERVICE_EXCEPTION (win32kbase.sys+4d8be)

Another BSOD.. I just turned on the computer went into Intel control panel to disable adaptive brightness and suddenly everything turned off and BSOD appeared, but somehow there's no reason visible in BlueScreenView, it was something with
Kernel Security Check Failure...

This time in BlueScreenView there is only one file highlighted - ntoskrnl.exe

Minidump https://onedrive.live.com/redir?resid=C28B2580DA30693!452&authkey=!AOgPyxYtrVWdLEE&ithint=file,dmp

Some other details:

0x00000139

00000000`00000003

ffffd000`8b97f750

ffffd000`8b97f6a8

00000000`00000000

ntoskrnl.exe

ntoskrnl.exe+142770

I have bad experience with Driver Verifier when I last time ran it...

 

Daily BSOD Kernel Security Check Failure - ntoskrnl.exe

Both this non verified dmp and the previous one mentioned fastfat.sys but was inconclusive. (Related to Fast FAT File System Driver from Microsoft Corporation) and I am wondering what kicks it off. Do you have a fat partition, or a SD card that is fat?

If you interrupt the normal boot 2x (as I said previously) on the third attempt it will let you get to safe mode.

 

Hi ssandoval83,

Welcome to the 10forums.

Your AMD drivers have been flagged.
Please try to remove the Catalyst Control Center and only install the drivers.

Code: *** WARNING: Unable to verify timestamp for atikmdag.sys *** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys *** WARNING: Unable to verify timestamp for atikmpag.sys *** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys[/quote] Code: 0: kd> lmvm atikmdag start end module name fffff801`2eba0000 fffff801`300aa000 atikmdag T (no symbols) Loaded symbol image file: atikmdag.sys Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys Image name: atikmdag.sys Timestamp: Mon Aug 03 21:57:16 2015 (55BFC79C) CheckSum: 014A1F5B ImageSize: 0150A000 Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4 0: kd> lmvm atikmpag start end module name fffff801`2cb70000 fffff801`2cc18000 atikmpag (deferred) Image path: \SystemRoot\system32\DRIVERS\atikmpag.sys Image name: atikmpag.sys Timestamp: Mon Aug 03 21:32:54 2015 (55BFC1E6) CheckSum: 000B443B ImageSize: 000A8000 Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4[/quote]

 

Code: 0: kd> lmvm atikmdag start end module name fffff801`2eba0000 fffff801`300aa000 atikmdag T (no symbols) Loaded symbol image file: atikmdag.sys Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys Image name: atikmdag.sys Timestamp: Mon Aug 03 21:57:16 2015 (55BFC79C) CheckSum: 014A1F5B ImageSize: 0150A000 Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4 0: kd> lmvm atikmpag start end module name fffff801`2cb70000 fffff801`2cc18000 atikmpag (deferred) Image path: \SystemRoot\system32\DRIVERS\atikmpag.sys Image name: atikmpag.sys Timestamp: Mon Aug 03 21:32:54 2015 (55BFC1E6) CheckSum: 000B443B ImageSize: 000A8000 Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4[/quote] [/quote] I removed the Catalyst control center just leaving the drivers i need for the video and hdmi audio.

 

will report back if another bsod

 

OK I Uninstalled Catalyst control center and it ran fine for about a day and I just got another BSOD with the same error

EDIT: It happened while watching youtube.

 

Please use the tool again and upload the zip file

 

here it is

Attachment 36331

 

Please update the AMD drivers.
When installing the CCC you can choose to only install the drivers.

 

will try to, but the amd autodetect utility says that their up to date, the only thing newer is the beta stuff.

 

OK, please scan your system with a full scan from Windows Defender and Malwarebytes free

In the installation of Malwarebytes, be sure to uncheck the trial option for the premium version.

 

sure

 

ran the above utilities and all came out clear/ no problems

in process of downloading the latest drivers from amd in hopes that it is simply a bad driver

 

If the newest doesn't help, install an older version.