Windows 10: BSOD Kernel security check failure on EMPTY hard drive

Hi,
i just completed a new computer build with a i3-6100 and a gtx760 with an msi h110m mobo and 8gb of gbmicro ddr4 single stick.

Now i need to install windows 10 on a EMPTY hard drive without any os(the hard drive is not brand new but its still very usable), and at like 25% the install crashes every time with a kernel security failure what the heck am i supposed to do ?

i am using a usb drive to boot the windows 10 install

All solution seems to point to booting to the os with safe boot or something but i dont have an os !

Please help me! Its been two days that im actively trying to find a solution.*Sad

:)

 

After "Kernel Security Check Failure" error, one application got incredibly slow

Hi,

Thank you for posting your query on Microsoft Community.

As per the description, I understand that you are getting kernel security check failure error.

I would suggest you to refer to the suggestions by Vinodh_Kumar V replied on October 24, 2015 and check if that helps.

Kernel security check failure BSOD on Windows 10



Hope this information helps. Please let us know if you need any other assistance with Windows in future. We will be happy to assist you.

 

PC keeps crashing during gaming (Kernel-Power: Event ID 41 Task Category 63)

Had another BSOD there while playing Rome 2 Total War.

'Kernel Security Check Failure'

 

Hi frisepoile,

Welcome to the 10forums *Smile

As this is a hardware issue, you have to use a different system to test certain parts. For certain parts, like the PSU and motherboard, there are no software tests.
For other parts, RAM, GPU and partly the HDD, you need to use a different system to perform software tests on because an OS is required.
Please let me know if you're unable to use a different system (necause no one will borrow theirs or any other reason).

I suggest to start with the below tests, because they (mostly) do not require an OS as they are DOS tests. For HDTunes you need a different system to test.






Diagnostic Test

RAM TEST
*Arrow Run HDTune to

• check the health,
• scan for errors, no quick scan but full scan
• run a benchmark.

It may take some time, but please take the time you need to perform it properly.
When above is done please make screenshots of the following

• the health,
• the error scan,
• the benchmark incl. following
  • transfer rate,
  • access time,
  • burst rate,
  • cpu usage.

*Arrow Run SeaTools DOS to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
Run the long test.
*Arrow Run chkdsk
Disk Check - Windows 7 Help Forums
Use option TWO with parameter /r
Upload the chkdsk log *Arrow http://www.sevenforums.com/tutorials...iewer-log.html

 

Ok. now i did the mem test and i tested my single 8 gb ddr4 stick and had errors on both slots but they are different i guess ? so does this mean my ram is bad or both dimm slots ? edit: also i did a second test on the second dimm slot(2nd image) and the error is now about the same as the first


Attachment 118453Attachment 118454

edit:i also did the hd tune pro tests here are the results:Attachment 118455Attachment 118456

 

Run memtest86+ on a different system with the single Ram stick and see what the result is. If there are errors then the Ram is bad, else the mobo

 

ok, thank you very much for your time man *Smile