Windows 10: BSOD kmode exception not handled boot loop

Hi,
today I got a very ridiculous problem with my computer. First of all, CPU, RAM & mainboard are new since january (System Infos in my profile)

I was away for a few minutes after watching youtube videos and I saw that my pc was in a boot loop with
the bsod message KMODE_EXCEPTION_NOT_HANDELED.

So first of all I plugged out all usb devices. Bsod still keeps. Then I plugged out my graphics card. Nothing changes.
Then I tested my RAM with Memtest86+, no errors.

Then I downloaded the newest Windows 10 ISO(from another computer), because I thought it was a Windows boot problem. So I burned the boot DVD but I couldn't start the setup. It showed "Please press any key to boot from CD/DVD.." But every time I pressed a key the cursor keeps blinking and nothing happend.

Then I thought it could be a DVD drive fail and so I plugged in an external USB DVD drive. But with the same behavior. Then I plugged out the BIOS battery for a reset.

Nothing changed.

I tried Hirens Boot CD, the mini Windows XP wasn't loading because of an ACPI bluescreen but I was able to boot the lunix system this CD.

Then back to the RAM, I plugged out one of two. Nothing changed. Then later the another one.

Then I tried an older ISO, and the DVD was loading. But even before the language selection was showed I got the same bsod screen as always. And I know I already used this ISO to install my Windows 10 on this system.

Then I plugged out every HDD, execpt a data HDD, and the internal DVD Drive. Nothing changed.


So I dont't have any further ideas.

Maybe you guys. I can not believe its the boad because its brand new. The RAM? No error In Memtest86+ and the linux was booted.


Please help *Sleepy

:)

 

Win 10 Reboot Loop of Death- system thread exception not handled (ntfs.sys)

Just browsing the web then the BSOD with the system thread exception not handled appeared, now it's in a booting loop. I tried to do safe mode and restore the PC but I only receive more errors.

Errors I receive:

System Thread Exception Not Handled (ntfs.sys)

Driver Overran Stack Buffer

Page Fault In Nonpaged Area

Driver IRQL Not Less Or Equal (NETIO.SYS)

PFN List Corrupt

Critical Structure Corruption

Unexpected Kernel Mode Trap

Memory Management Error

System Service Exception

Exception Scope Invalid

Kernal Auto Boost Invalid Lock Release

Kmode Exception Not Handled (ndis.sys)

Every once in 500 or so boots, it does boot successfully to desktop but the system thread error appears and the bootloop continues.

 

Windows 10 - BSOD: KMODE EXCEPTION NOT HANDLED (cng.sys)

Hi,

We suggest that you try the workaround suggested on DonchakVS's reply on August 5, 2015 and check if it resolves the issue:

Windows 10 - BSOD: KMODE EXCEPTION NOT HANDLED (cng.sys).

 

Can you boot Linux again. If yes, zip the dumps from the Windows boot drive (may or may not be C: } in \Windows\minidump and upload the resulting zip file here.

 

Thank you for your answer. I attached it here but I think they are all empty. *Sad

 

What is the make and model of your computer? Each computer manufacture has a F key to choose the boot device. For HP computers it is the F9 key. If you can find the F key then you may be able to boot to the windows 10 iso and use the windows troubleshooting menu. If you can not determine the F key you may be able to use the appropriate F key to boot to the bios and change the boot order so that the USB port is on top. Then you can reset with save files, in place upgrade, clean install, command prompt etc.
Some computer manufacturers have bios UEFI diagnostics. If you can boot to the bios you may be able to run extensive checks or component tests. If your computer manufacturer has UEFI diagnostics by download you may be able to use linux.

 

@zbook, looks like a home built with a MSI Mainboard Z170A GAMING PRO CARBON LGA 1151 mother board, at least that's what his sopecs say. Manual is here: Support For Z170A GAMING PRO CARBON | Motherboard - The world leader in motherboard design | MSI USA

According to it's specs, it has USB 3 and 2 ports.

Entering BIOS Setup
Please refer the following methods to enter BIOS setup.

Press Delete key, when the Press DEL key to enter Setup Menu, F11 to enter Boot
Menu message appears on the screen during the boot process.

Use MSI FAST BOOT application. Click on GO2BIOS button and choose OK. The
system will reboot and enter BIOS setup directly.

 

As I wrote in my first post I was able to start from Windows 10 DVD, but even before any menu was popped up the bsod appeared again without any internal devices plugged in.

 

Yes, empty. Not sure how you created the zip file but try it again.

 

Hi,

Dropbox - dmpfiles.zip

I uploaded some dmp files here.

 

Almost all the dumps are the same:
Code: BugCheck 1E, {ffffffffc0000005, fffff8016b772060, 0, ffffffffffffffff} Probably caused by : memory_corruption[/quote] A few are this instead:
Code: BugCheck 1000007E, {ffffffffc0000005, fffff803517dc9a9, ffff8901a983c7d8, ffff8901a983c000} Probably caused by : memory_corruption[/quote] This could be RAM or a Device Driver. How many passes did you run memtest86+ ? A minimum of 8 passes is required.

Also, from what I read online, you need to turn off Secure Boot to boot the Windows 10 DVD.

You've already eliminated a lot of hardware so it is possible the mainboard is the problem. If nothing else is found then maybe RMA the board.