Windows 10: BSOD loop, unable to access winRE or desktop

Hello everyone! Pc specs: Asus prime x570 pro Amd ryzen 7 5800x One M.2 ssd 2 normal ssd's 750 sf platinum psu GTX 1080 graphics card My newly built pc (except for GPU) just shut itself off without warning today whilst I was just surfing the web. It reebooted automaticly but after boot I was just greeted with the BSOD where it said that my pc had run into a problem and needed to repair and restart. It did so automaticly again but the automatic repair was interupted by another BSOD. From here it just continued looping like that. I am able to get into the bios. I've tried different methods to get into WinRE, but it simply does not open and just keeps giving me the BSOD loop everytime. I have also tried booting from a USB stick to try and force the WinRE. Once when I did that it just gave me a blue colored screen with no text on it. If I then clicked on anything on my keyboard the boot logo would would show and flicker between that and the blue colored screen. I also tested the USB stick on another PC, and it worked to get to Windows setup there. These are the error codes, I get a different one everytime the pc restarts: KERNEL_SECURITY_CHECK_FAILURE PAGE_FAULT_IN_NONPAGED_AREA CONFIG_INITIALIZATION_FAILED IRQL_NOT_LESS_OR_EQUAL PHASE1_INITALIZATION_FAILED REFERENCE_BY_POINTER Could this be my motherboard thats somehow causing this? The ssd's all show up in bios, as well as the RAM, cpu and gpu. Since I cant reach WinRe or (obv.) the desktop, I am quite unsure what to do at this stage... Thanks in advance!

:)

 

bsod loop device verifier ionmanager violation

Hi Tom,

To better assist you, provide the answers to the following questions:

• Have you made any changes on your device prior to the issue?
• What is the complete error message that you're seeing on the screen?

For the meantime, we suggest checking the answers on the following threads below which we found similar and helpful in resolving the issue:

Windows 10 Driver Verifier BSOD loop.. how to get out of it?

Windows 10 stuck in bsod reboot loop

Let us know if you need further assistance.

 

Windows 10 automatic repair fail loop

Hi,

We understand your concern and we will provide the assistance required to help resolve the issue.

I suggest that you perform Power Drain which will help you skip the reboot loop and help you access the PC. To perform Power Drain, refer to the steps below

• Unplug the charger and remove the battery of your laptop, if using a desktop remove the power cord.
• Press and hold the Power button for 30sec
• Plug the charger/power cord and restart system.

Hope this helps

Regards

 

Stuck in a loop after windows performed repair

Hi,

Thank you for posting in Community.

We understand your concern and we will provide the information required to help you resolve the issue.

As per the information that you have provided, I suggest that you perform Power Drain as you are stuck in a loop and this might help you access the desktop screen. To learn how to perform this follow the steps below

• Unplug the charger and remove the battery of your laptop, if using a desktop remove the power
  cord.
• Press and hold the Power button for 30sec
• Plug the charger/power cord and restart system

Hope this helps