Windows 10: BSOD / Memory problem

Hi there,Problems started when I left my PC on one night to update. And then after that I started experiencing frequent blue screens I have tried running in Safe mode but it ends up in a boot loopTrying to reset the PC for a OS reinstall doesn't workMinidump file constantly gets refreshed - most recent dump file is January 12 but I've been having frequent crashes since then DISM tool does work either and returns a errorAutomatic maintenance also doesn't workThis is what shows up when I use sfc /scannowThis a screen cap of what the blue screen looks like with 0xc000021a as stop code; sometimes

:)

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.

 

Blue Screen Problems

How long did you let memtest run for? I would let it run overnight. Did you try running something like Intel Burn Test? It sounds like you took the steps I would suggest. I had that same motherboard (and E8400) and when I had that BSOD it was always memory related.

 

Memory issues

Thank you for updating us. We suggest that you run the Memory Diagnostics Tool, this is to check your system for memory problems. Follow the steps below:

• Open Control Panel and type memory in the search bar.
• Click on Diagnose computer memory problems to open it.
• If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
  

Let us know the status of the issue.