Windows 10: BSOD - minidump

Anyone able to help analyze the mini dump and tell us what the issue is?we've swap the entire hardware with exemption of the Harddrive and OS and we are still getting BSOD

:)

 

Bsod with Vista64

Well i finally found a site where it tells the average computer user , step by step how to open a minidump through windbg . I was shocked to see the first one had at the Image name Ntfs.sys can this really be making problems?, the second was with video driver and the third is with tcpip.sys *Frown .

 

BSOD Driver_Power_State_Failure minidump

Every so often I get BSODs due to Driver Power State Failure. I've tried the conventional wisdom of reinstalling corrupt drivers in Safe Mode w/ Networking, but to no avail. I saved a minidump of the most recent crash, but I had problems trying to analyze it in WinDBG (something about incorrect symbol paths... at that point it was too technical for me to comprehend). Could someone please analyze this minidump and advise how to prevent future BSODs?
Many thanks

Running Windows 10 Home 1803 (build 17134) on Asus Q302LA, SMBIOS version 2.7

 

Minidumps not generated after a bluescreen in Win8.1

Lenovo Flex 2-14, windows 8.1 64bit, 4GB RAM, 8SSD-500HDD. All software setup from factory.

The laptop freezes randomly without any pattern and BSOD.

The bluescreen says kernel_data_inpage_error and collecting more info is stuck at 0%. It never progresses and I have to hard power down the laptop. After reboot, there are no minidumps generated(minidump is enabled in adv. settings). Sometime the BSOD also gives another additional info in braces (ntoskernal.sys, volmgr.sys, and few other). occurs at least once every one/two day. Any reason why Minidump is not generated?

Sometimes the laptop also restarts for no reason and shows up the windows boot manager which does not lists the HDD. Is it that HDD is not detected and is it related to the above problem?

The HDD is GPT partioned with UEFI boot enabled. After a lot of factory resets, and even after upgrading to win10, had the BSOD issues.

Someone suggested to change the boot option to legacy. Now I have factory image restored (win8.1) in GPT HDD with leagcy first boot option. I have used the the laptop for a couple of days and the BSOD did not occur till now. Is this a right solution?

Is this a hardware problem because This BSOD occurred in the middle of HDD partitioning after rebooting in AOEMI partition assistant and once while upgrading to win10.(loose cable maybe, but its a brand new laptop and the issue occurred even before putting on any new software) or caused by the boot options?