Windows 10: BSOD new PC

Hello,

I'm a first time builder and really don't have that much knowledge in the PC space. After building yesterday everything booted up perfectly on the first time no issues. When I went to install windows with the media creation usb file I was met with the first of many bluescreens. I rebooted, and then went through the windows install no problem. It seemed to be working fine, got many of my drivers updated chipset, wifi, bt, graphics, not sure if I need more but then I started getting more bsod's. I've gotten various codes thrown up for it, all listed below if it's any help. Some friends of mine thought it was either a driver or RAM issue, I've taken out and put back in the RAM, ran a memtest overnight which it passed. For the drivers question, I'm not sure exactly where to go, if that's the issue.


The bugcheck was: 0x0000003b 0x00000000c0000005, 0xfffff8001df37efd, 0xfffffc86d93796b0, 0x0000000000000000

SYSTEM_SERVICE_EXCEPTION


The bugcheck was: 0x0000000a 0x00000000f3a364e0, 0x00000000000000ff, 0x0000000000000000, 0xfffff80421e72040

IRQL_NOT_LESS_OR_EQUAL


The bugcheck was: 0x0000003b 0x00000000c0000005, 0xfffff807176c80f0, 0xffff9580be561920, 0x0000000000000000

SYSTEM_SERVICE_EXCEPTION


The bugcheck was: 0x0000000a 0x0000000000026068, 0x00000000000000ff, 0x00000000000000ff, 0xfffff8016172a217

IRQL_NOT_LESS_OR_EQUAL


The bugcheck was: 0x000000d1 0x0000000000000000, 0x0000000000000002, 0x0000000000000001, 0xfffff804468fe1c8

DRIVER_IRQL_NOT_LESS_OR_EQUAL


The bugcheck was: 0x0000000a 0x0000000000000001, 0x00000000000000ff, 0x0000000000000000, 0xfffff8054ed275c9

IRQL_NOT_LESS_OR_EQUAL


The bugcheck was: 0x0000001e 0xffffffffc0000094, 0xfffff8070c52850b, 0xffffa98b24698cb0, 0x0000000000000001

KMODE_EXCEPTION_NOT_HANDLED


The bugcheck was: 0x0000001e 0xffffffffc0000005, 0xfffff80531a083fb, 0x0000000000000000, 0x0000000000000023

KMODE_EXCEPTION_NOT_HANDLED


The bugcheck was: 0x0000000a 0x0000000000000013, 0x00000000000000ff, 0x00000000000000ff, 0xfffff8027f92a217

IRQL_NOT_LESS_OR_EQUAL


Any help is appreciated, thanks


System specs are:

Gigabyte Z390 Aorus Master

i9-9900k

Corsair Vengeance RGB Pro 16gb 3200MHz

MSI Gaming Z RTX 2070

Corsair H100i AIO

Gigabyte P850GM

Samsung 970 EVO 500GB

Seagate Barracuda 2TB

:)

 

PC reboots (no BSOD) on CPU stress

Hi fellow TPU members,

not too long ago, the box my gf's PC was transported in gave way on the stairs. Yes, you got it right, that sent a PC tumbling down a flight of steps alright.

Stuff broke. Also, stuff remained intact somehow.

I bought her a new case, new CPU cooler and we removed the floppy drive, so far so good. But the PC started crashing for no apparent reason, without a BSOD.

I tested:

• Memtest86+, left overnight, 0 errors
• Scanned the HDD for errors, nothing there
• Left FurMark burning up the GFX card and drawing some power, no problems there
• Ran Ubuntu from a Live CD doing nothing special, didn't crash
• Ran OCCT, Linpack, Prime95, all 3 caused reboots within minutes
• Oh, and I disabled "Restart on error" so I'm sure it's not a BSOD.

Now, I can still try and test something CPU intensive on Ubuntu, but my guess is the CPU didn't survive.
Before I do anything drastic like whippin' out the magic wallet and get her a new AMD quad, is there anything I didn't see?
I'm guessing the motherboard could be borkered as well, but can I check that other than replacing the CPU with a working one?
Any suggestions on which proggies I can use from an Ubuntu Live CD to stress the CPU?

 

BSOD help with new PC

Hi,

My new PC (Win 10) has a BSOD every few minutes with a DPC Watchdog violation.

I've followed a number of the typical debug steps:

• Updated drivers inc. chipset and graphics
• In device manager checked IDE ATA/ATAPI controllers, the driver is storahci.sys and I've tried to updated using the Standard SATA AHCI Controller on my PC
• No external devices are attached
• removed AV
• Disabled Sound drivers in device manager

Still the problems are occurring frequently. I have a minidmp file here: 012718-5515-01.dmp

and there is also a 700MB memory.dmp that I can share if it is helpful?

Grateful for any advice that anyone can share. Thanks in advance.

 

Brand new PC BSoD

Hi,

Corrupted drivers and system files are one of the possible reasons why this issue is happening. We'd like to get additional information to help resolve the issue. Kindly answer the following questions below:

• What is the stop error code showing on the screen whenever you experience BSoD? (e.g.: 0x0000000A, 0x0000003B, and 0x000000EF)
  
• Did you installed any third-party applications on your new computer before the issue started?
  
• Is there a specific action you're doing on the computer that triggers BSoD?
  

In the meantime, we suggest performing the possible solutions in this
article
to help resolve blue screen errors.

We'll keep an eye out for your response.