Windows 10: BSOD not long after formatting my PC

I just got a BSOD with the message "KMODE_EXCEPTION_NOT_HANDLED" on my Windows 10 PC. I formatted it a couple days ago. I was watching a stream when it happened. Any idea what might've happened?

:)

 

How To Format A Write Protected Flash Memory ?

¿You already tried this one?...

Run CMD


1. diskpart
2. list disk

Then in the 3º step, put the correct number of disk in the list for the usb flash (if it's listed in disk 3, then you'll have to write select disk 3).

2. select disk #
3. clean
4. create partition primary
5. select partition 1
6. active
7. format fs=fat32
8. assign
9. exit

with that commands you will format the flash drive in fat32, if you have a large drive you can select also "format fs=ntfs" in step 7.

good luck!

 

PC reboots (no BSOD) on CPU stress

Hi fellow TPU members,

not too long ago, the box my gf's PC was transported in gave way on the stairs. Yes, you got it right, that sent a PC tumbling down a flight of steps alright.

Stuff broke. Also, stuff remained intact somehow.

I bought her a new case, new CPU cooler and we removed the floppy drive, so far so good. But the PC started crashing for no apparent reason, without a BSOD.

I tested:

• Memtest86+, left overnight, 0 errors
• Scanned the HDD for errors, nothing there
• Left FurMark burning up the GFX card and drawing some power, no problems there
• Ran Ubuntu from a Live CD doing nothing special, didn't crash
• Ran OCCT, Linpack, Prime95, all 3 caused reboots within minutes
• Oh, and I disabled "Restart on error" so I'm sure it's not a BSOD.

Now, I can still try and test something CPU intensive on Ubuntu, but my guess is the CPU didn't survive.
Before I do anything drastic like whippin' out the magic wallet and get her a new AMD quad, is there anything I didn't see?
I'm guessing the motherboard could be borkered as well, but can I check that other than replacing the CPU with a working one?
Any suggestions on which proggies I can use from an Ubuntu Live CD to stress the CPU?

 

Windows Format Configuration (time)

Hi Joc,

Thank you for posting on Microsoft Community. I will certainly help you with this.

I suggest you to try the below given steps and check if it helps you to change the time format.

• Press Windows key + X key, clicking Control Panel, clicking
  Clock, Language, and Region, and then clicking
  Region.
  
• Click the Formats tab, and then, in the
  Format list, select the Match Windows display language (recommended)
  under Format.
• Check if the h: mm: tt is available under Short time and
  Long time format.

Please post back with the results, we will be glad to assist you further.



Thank you.