Windows 10: BSOD nt_wrong_symbols.sys

I am getting quite a few BSODs while running games (eg. Fortnite). It had only recently started and the crash message isnt always the same. The dump files that I have manged to get and is from WhoCrashed is the following:


Windows version: Windows 10 , 10.0, build: 17134
Windows dir: C:\WINDOWS
Hardware: ASRock, H87M
CPU: GenuineIntel Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz Intel586, level: 6
8 logical processors, active mask: 255
RAM: 8505630720 bytes total


Crash Dump Analysis


Crash dumps are enabled on your computer.

Crash dump directories:
C:\WINDOWS
C:\WINDOWS\Minidump

On Mon 1/10/2018 2:07:16 PM your computer crashed or a problem was reported
crash dump file: C:\WINDOWS\Minidump\100118-4484-01.dmp
This was probably caused by the following module: nt_wrong_symbols.sys (nt_wrong_symbols)
Bugcheck code: 0x1A (0x3F, 0x120A3B, 0x132D02D7, 0x132D02D3)
Error: MEMORY_MANAGEMENT
Bug check description: This indicates that a severe memory management error occurred.
This might be a case of memory corruption. This may be because of a hardware issue such as faulty RAM, overheating (thermal issue) or because of a buggy driver. This problem might also be caused because of overheating (thermal issue).
A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: nt_wrong_symbols.sys .
Google query: nt_wrong_symbols.sys MEMORY_MANAGEMENT



On Mon 1/10/2018 2:07:16 PM your computer crashed or a problem was reported
crash dump file: C:\WINDOWS\MEMORY.DMP
This was probably caused by the following module: nt_wrong_symbols.sys (nt_wrong_symbols)
Bugcheck code: 0x1A (0x3F, 0x120A3B, 0x132D02D7, 0x132D02D3)
Error: MEMORY_MANAGEMENT
Bug check description: This indicates that a severe memory management error occurred.
This might be a case of memory corruption. This may be because of a hardware issue such as faulty RAM, overheating (thermal issue) or because of a buggy driver. This problem might also be caused because of overheating (thermal issue).
A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: nt_wrong_symbols.sys .
Google query: nt_wrong_symbols.sys MEMORY_MANAGEMENT


I have attached a link to the minidump file. Let me know if I need to provide more information.

https://drive.google.com/file/d/1IqyxdvR1ur0AizarxgUuUb8RxTwjk_Gc/view?usp=sharing




:)

 

wdf01000.sys and ntoskrnl.exe BSOD

I'm on Windows 10, 64bit

Basically, whenever I try to update my LPC controller through Device Manager, BSOD with WDF_VIOLATION occurs (culprit being wdf01000.sys)

So I try to use the driver verifier to see which driver is causing the BSOD, but then it causes BSOD (cultprit being ntoskrnl.exe)

Have no idea which driver is causing them

Please help!

Here are my list of drivers and system info: https://1drv.ms/f/s!AnJkEaK1eZwggSyLExwR9jBiL-lr

 

BSOD - driver_irql_not_less_or_equal (l1c63x64.sys)

Hi Seung,

Sorry for the inconvenience caused by BSOD - driver_irql_not_less_or_equal (l1c63x64.sys).

Please let us know the make/model of your computer.

The L1C63x64.sys is the Atheros LAN driver and I would suggest to uninstall and reinstall the Atheros LAN driver but install the latest Atheros LAN driver by visiting the manufacture's website and avoid using any LAN driver available though Windows Update.

However the problem could also be with any VPN software and other software so make sure you have the latest version of each of these software.

If the errors continue uninstall the VPN software and check if the issue persist.

Hope this helps. Get back to us for further queries for BSOD - driver_irql_not_less_or_equal (l1c63x64.sys). We are happy to help!

 

7 different BSoD

Hey guys,

I have a serious problem. I make it as short as possible:

• system runs 100 % fine with the 10.12
• updatet to Catalyst 11.1 -> BSoD
• updatet to 11.1 Hotfix -> BSoD
• rollback to 10.12 -> BSoD
• removed ALL AMD files manually, installed 10.12 -> BSoD

• Temps are fine
• no sfc /scannow errors
• no chkdsk errors
• Prime, Furmark all fine
• regardless what driver I install -> BSoD
• I did no hw changes, no OC

Here are my BSoDs I receive:

• 0x0000010e
• 0x1000007e
• 0x0000007e
• 0x0000004e
• 0x0000003b
• dxgmms1.sys
• PFN_LIST_CORRUPT

They all refer to the GPU of course ...

From now on I receive a BSoD every time I try to play a game (especially BC2 and SC II) even if I completely remove the old driver and make a clean install.
Apparently the 11.1 damaged my system irreparable.

Any advice or info would be very much appreciated *Smile