Windows 10: BSOD on system start up, can anyone help?

Hello,I was looking for help regarding my BSOD errors. My minidumps are here:https://drive.google.com/file/d/1sFcsBly0DTdAHjBkGaDt8r7armbDuiro/view?usp=sharingBSODs appear on startup of the system, with increasing frequency, the messages very and are rarely the same:-IRQL_NOT_LESS_OR_EQUAL What failed: ntoskrnl.exe-SYSTEM_THREAD_EXCEPTION_NOT_HANDLED-MEMORY_MANAGEMENT-HYPERVISOR_ERROR-CLOCK_WATCHOG_TIMEOUTThe first one, IRQL_NOT_LESS_OR_EQUAL is one that appears most of the time. I do not know, as stupid as it sounds, is Windows aware actually of what is causing the issue, given that it give

:)

 

help to remote connect

not sure how to use both programs u 2 suggested, i need more helpful steps thanks

 

HELP, my PC has started BSOD`ing

In my experience, video cards usually don't BSOD when they crash, either the driver crashes and recovers, or your game freezes. PSU's tend to shut off the machine instantly when going bad... Bad drives will either crawl the system, or you will not be able to boot if a system file got corrupted - but they usually won't BSOD.

Unstable ram with BSOD 99% of the time (unless its so unstable that the computer just reboots), Lightly unstable processors will BSOD (again, if you are really unstable then you will power cycle and reboot)... Mobo's going bad...

And finally - software, drivers etc etc. are you always doing the exact same thing when it BSODs? if so - it could be software - but if they are random then chances are hardware. Again - as said before - never assume, you will save time if you step through the usual suspects first.

 

BAD_POOL_HEADER BSOD, Dump File attached


Hi Groggubus,

Welcome to the 10forums

Please remove / disable items from the startup in taskmanager
These programs could interfere with the boot process giving you trouble and increase the boot time.

Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover.

1. Uninstall Daemon Tools
2. Download the SPTD standalone installer and follow these steps:
   • Double click the executable to open it
   • Click on the button shown below

If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window

Please follow this suggestion for the BSOD

1. Please open BitDefender and go to the modules,
2. Go to the firewall settings,
3. Uncheck 'Block port scans in the network',
4. Reboot your system <-- IMPORTANT