Windows 10: BSOD on windows start up

Hello

When I turn my computer on it will come up with a BSOD (usually driver related) then the computer restarts and windows starts up fine. However I then have other problems with windows it's self. The computer won't connect to a network, the homegroup doesn't work and I can't print over the network, also the windows update service and various other windows online services don't work.

I have tried updating all drivers and the BIOS. Also I have tried SFC and DISM but these have made no difference.

I would appreciate any help

Attachment 108510

:)

 

BSOD after starting to install AMD drivers to get win 10 to see my other 3 monitors

That method ONLY works if windows will come up. Windows will NOT START.

1. BSOD "ATTEMPTED EXECUTE OF NOEXECUTE MEMORY"

2. It shuts down, then goes to:

3. Prepairing automatic repair - THEN another BSOD

"WDF_VIOLATION"

4. It shuts down, then goes to:

5. (it attempts restart-then goes to)

6. BSOD "ATTEMPTED EXECUTE OF NOEXECUTE MEMORY"

7. It shuts down, then goes to:

8. Prepairing automatic repair - THEN another BSOD

"WDF_VIOLATION"

9. (it attempts restart-then goes to)

10. BSOD "ATTEMPTED EXECUTE OF NOEXECUTE MEMORY"

11. It shuts down, then goes to:

12. Prepairing automatic repair - THEN another BSOD

"WDF_VIOLATION"

THIS IS A FOREVER LOOP. WINDOWS WILL NOT START - F8 or SHIFT F8 will not --- repeat WILL NOT start safe mode.

Every solution you have given me so far NEEDS WINDOWS TO START! WINDOWS WILL NOT START.

 

Windows 10 x64 BSOD irql not less or equal

Hi there!

I have Lenovo T460s UltraBook with Windows 10 x64 onboard and the same problem but...

BSOD's shows up in very random times. All my drivers are up to date (updated today from official Lenovo site).

Computer starts normally works fine and... BSOD. Last one was few minutes ago. Computer was idle. I've started Windows after BSOD, logged in and did nothing. After 3 or 4 minutes Windows crashed with BSOD.

All factory diagnostics passed.

Memory dump is here:

https://1drv.ms/u/s!An3BHu_b5TxXiP1kZ9m_ZWe-rJdRaQ

I hope that someone can help me.

Regards

SK

 

Looks like a corrupted hiberfile.sys:

Code: INTERNAL_POWER_ERROR (a0) The power policy manager experienced a fatal error. Arguments: Arg1: 000000000000010e, The disk subsystem returned corrupt data while reading from the hibernation file. Arg2: 000000000000000a Arg3: 000000000000afac, Incorrect checksum Arg4: 0000000000001b64, Previous disk read's checksum[/quote] Boot from a Windows 10 install disk or USB or get Kyhi's WindowsPE ISO and create a DVD or USB to boot.

It should be C:\hiberfile.sys and will be a hidden, system file so you will need to use the attrib command to turn those attributes off. The you should be able to delete the file. Hopefully that will resolve the BSOD at boot.

From a Command Prompt after booting the install or WindowsPE disk or USB:

attrib -s -h -r c:\hiberfile.sys
del c:\hiberfile.sys

Exit and reboot and see if it comes up okay.

 

Thank you for a response
I don't know if it has worked as it only has a BSOD when I start up the computer for the first time that day but I will tell you if it has fixed the problem tomorrow.
However edge, various Microsoft services (including the automatic updates) don't work and my computer wont connect to a network so I can't connect to a homegroup or print over the network. A fix for this would be appreciated.

 

For non-BSOD problems you would do better to post in the General Support | Windows 10 Forums

More people hang out there.

 

Thanks for the help the fix seems to have fixed it

 

Good, glad to hear I could help.