Windows 10: BSOD PAGE_FAULT_IN_NONPAGED_AREA 0x00000050 ntoskrnl.exe

System Spec

Computer typeC/DesktopOS:windows 10 pro 64x CPU:intel 4790kMotherboard:msi z97 gaming 7Memory:2x G.SKILL Ripjaws X Series 8GBGraphics Card(s):evga gtx 970 SC
Samsung Evo 850 500gb ssd

Hello Everyone.

I keep getting this error. This usually happens when the computer is idling for an extended period of time. These are some things I've done to trouble shoot the issue.

1. I've ran sfc and it was clean

2. 99% of the time this happens when my computer is idling.

3. I ran driver verifier and it crashed immediately after rebooting. and ive included the results in the logs

4. checked the logs manually with bluescreen viewer, and I see that ntoskrnl.exe is the main culprit

5. Ran memtest86 overnight and no errors.

6. Removed SCP controller drivers.

update: just got a bsod today "IRQL_NOT_LESS_OR_EQUAL" ntoskrnl.exe same file as before.



Here are the logs.

:)

 

BSOD

Hi,

i meet on BS case, i had replace motherboadr and hard disk, issue same.

please help me fix it

PAGE_FAULT_IN_NONPAGED_AREA

0x00000050

ffffbc00`c73ffff8

00000000`00000000

fffff804`0c651110

00000000`00000000

ntoskrnl.exe

ntoskrnl.exe+1640e0

 

Windows 10 64-bit Blue Screen of Death

Hi,

several BSOD happens when wake up the PC in a sleep mode, it does not happen everyday, bug check string, code and caused by driver as follows:

SYSTEM_SERVICE_EXCEPTION, 0x0000003b, ntoskrnl.exe.

PM KMODE_EXCEPTION_NOT_HANDLED 0x0000001e ndis.sys.

AM IRQL_NOT_LESS_OR_EQUAL 0x0000000a ntoskrnl.exe.

PM PAGE_FAULT_IN_NONPAGED_AREA 0x00000050 FLTMGR.SYS.

PM SYSTEM_SERVICE_EXCEPTION 0x0000003b atikmdag.sys.

Here is the link for DMP and MSinfo

My PC dmp and info.zip

Computer specification:

OS: windows 10 64-bit

CPU: intel core i7-4770 3.40GHz

Ram: 16 GB

Video card: AMD ATI Radeon R9 390x

Motherboard: Gigabyte Z87-HD3

 

If you are using a program like Ccleaner please stop using it while troubleshooting.
This because programs like Ccleaner remove dump files that are needed to troubleshoot.
Or configure Ccleaner to not remove dump files:





Please fill in your system specsPlease follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely including PSU, cooling and other used stuff like mouse, keyboard, monitor, case, etc.
The PSU, cooling and other stuff are NOT mentioned in the tool.
In the left corner below in your post you find 'My System Specs'. After clicking it you can find a link a little below that says 'Update your System Spec', click on this link to get to the page where you can fill in your system specs.

 

Hey I did what you asked. I updated my system info.

 

Please complete your system specs.

 

its done, don't know why it didn't take before. I got another bsod today I had utorrent active.
DRIVER_IRQL_NOT_LESS_OR_EQUAL 0x000000d1

here is the new log

 

Diagnostic Test

RAM TEST


Run MemTest86+ - Test RAM - Windows 10 Forums



Note



MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

Make a photo of the result and post it.

Addition:
If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
If errors show up and you see them a lot later, no problem, the errors don't affect the test.

 

I mentioned when I first made the thread the things I did to troubleshoot the issue. One of them was running memtest overnight with no errors.

 

I'm sorry to argue about it, but the requested test is MemTest86+.

IF you ran MemTest86+ already, an overnight test is not enough for the amount of memory mentioned in your system specs.
Most users have 8GB of memory: running MemTest86+ until 8 passes with 8GB takes 8-10h (overnight).
Those who have 16GB of memory: running MemTest86+ until 8 passes takes about 1 day to 2 days.