Windows 10: BSOD problem

Ive been facing a problem on my pc that requires replacing a psu, then i replace it with YGT 750W psu, and i also upgraded my hdd to ssd and my ram from 4gb ddr3 to 8 gb ddr3, but after installing windows 10 pro, the latest version, i encounter BSOD a lot, after using my pc for minutes, i tried checking my ssd and ram and also psu, but it all work well and fine. What was the possible cause of my BSOD? btw my processor was i3 550 and my motherboard was samsung desktop system

:)

 

BSOD- atikmpag.sys

This is most likely due to an installation/upgrade error with ATI driver's. I suggest doing DriveSweeper and the following:

• Drivesweeper all drivers & in Safe Mode
• Unistall all drivers that aren't used in DriveSweeper (CCC Profiler Updates, MSI AfterBurner, anything related to ATI that use's it's drivers.)
• After you do this, the first thing you need to do is go into Device Manager and Unistall your ATI Drivers

Once your done, restart the PC and then try installing the latest drivers.


I had several issues with this in the past, but I overcame it with logical reasoning and whenever I have a driver issue, I just use these steps and I always overcome the problem.

Best of luck! *Toast :toast:

 

Weird BSOD problem


Hi Everyone,

I have a weird BSOD problem which I cannot solve for a while(it persists still after upgrade to Windows 10 from Windows 7)

The main strange thing about this is that I get BSOD only after cold boot.
So it acts like this:

1. start PC.
2. Get to Windows Logo Screen
3. BSOD
4. Restart
5. Get to menu where I can try to repair or Start NormallyIf I Choose Repair, it will fail to repair and will try to restoreIf I Choose Start Normally, it will start OK, no BSOD, can work normally, games, browse internet, everything is normal.6. Shutdown PC
7. Next time when I start is all over again i.e. Go to Step 1

I have this problem for a while, so what I tried:

1. Another Windows 7
2. Another HDD
3. Only HDD connected
4. Changed RAM
5. Tried with built in GPU
6. Upgraded to Windows 10

Result is the same as above every time.

Please suggest what could be the cause.
Logs collected with DM_Log_Collector, attached.


Thank you

PS. This thread is a continuation of this one: Frequent multiple errors BSOD. Solved - Windows 7 Help Forums the only thing changed is Windows 10 now. instead of Windows 7. If that helps somehow.

 

Windows 10 1709 System Restore problems...

That seems to be an attempt at Option 2 in the tutorial, which requires you to
a. Boot to a command prompt (Did you?)
b. You then seem to be mixing steps 3,4 and 5, thus your command is incorrect.

I suggest Option 1 is easier.

If you still have problems, please repost listing each specific step and saying which option from the tutorial you are using. Thanks.