Windows 10: BSOD problems with KB5004945 (which included KB5000736)

Hi- After updating to KB5004945, I've been getting intermittent BSOD's with the following failure codes 0x00001000CDCCDD, 0x000000000000002, and 0xFFFFF802461498. I have used the following procedure RUN IN POWERSHELL AS ADMIN. DISM /online /cleanup-image /restorehealth sfc /scannow To attempt to fix this problem, but the problem seems to still persist. After the BSOD, I reboot and things are OK until next time... Any advice is appreciated. Thanks. BTW, I am using a Lenovo all-in-one Ideacenter PC. with the following configuration: Device nameDESKTOP-4L8GH8L ProcessorAMD Ryzen 3 3200GE with Radeon Vega Graphics 3.30 GHz Installed RAM8.00 GB (5.93 GB usable) Device ID76B9554B-3946-4924-992B-6E5FCAA6B546 Product ID00325-81456-50639-AAOEM System type64-bit operating system, x64-based processor Pen and touchNo pen or touch input is available for this display

:)

 

BSOD problems with KB5004945 (which included KB5000736)

Hi-
After updating to KB5004945, I've been getting intermittent BSOD's with the following failure codes 0x00001000CDCCDD, 0x000000000000002, and 0xFFFFF802461498. I have used the following procedure RUN IN POWERSHELL AS ADMIN.

DISM /online /cleanup-image /restorehealth

sfc /scannow

To attempt to fix this problem, but the problem seems to still persist. After the BSOD, I reboot and things are OK until next time... Any advice is appreciated. Thanks.

BTW, I am using a Lenovo all-in-one Ideacenter PC. with the following configuration:

Device name DESKTOP-4L8GH8L
Processor AMD Ryzen 3 3200GE with Radeon Vega Graphics 3.30 GHz
Installed RAM 8.00 GB (5.93 GB usable)
Device ID 76B9554B-3946-4924-992B-6E5FCAA6B546
Product ID 00325-81456-50639-AAOEM
System type 64-bit operating system, x64-based processor
Pen and touch No pen or touch input is available for this display

 

Overclocking / Undervolting guide for Vega 56 or 64?

Here's a quick laundry list:

List of software to use for overclocking and testing
Examples:
Wattman (and how to find and use it, like an overview, including profiles)
Unigine Valley or Heaven (use this for quick testing while changing settings in Wattman and checking for stability / artifacts) ...just suggesting this
How to monitor cores / mem speeds and temps during testing (I've seen screen overlays, and others using GPUz)

Step-by step overclocking in Wattman
Fan speeds
Power limit
Temp limit
Voltages
Core speeds
Memory speeds

 

BSOD- atikmpag.sys

This is most likely due to an installation/upgrade error with ATI driver's. I suggest doing DriveSweeper and the following:

• Drivesweeper all drivers & in Safe Mode
• Unistall all drivers that aren't used in DriveSweeper (CCC Profiler Updates, MSI AfterBurner, anything related to ATI that use's it's drivers.)
• After you do this, the first thing you need to do is go into Device Manager and Unistall your ATI Drivers

Once your done, restart the PC and then try installing the latest drivers.


I had several issues with this in the past, but I overcame it with logical reasoning and whenever I have a driver issue, I just use these steps and I always overcome the problem.

Best of luck! *Toast :toast: