Windows 10: BSOD random Memory_Management, error 0x0000001a

Hi folks, not long ago I get new machine: Asus Deluxe Z170, intel i7 6770k, G. Skill Ripjaws V DDR4-2400, etc... The system is unstable, the BSOD´s mainly show while windows 10 on load.

https://db.tt/kyToyaYN

I dont know if its problem of hardware or drivers (very newer).

Someone would be so kind and help me, please?

:)

 

two BSOD on connecting Sony Camera

Hi

I've had two BSOD stop 0x1a in the past 10 days. Both are Memory Mgt, both have been 5 seconds after connecting a Sony camera.

BlueScreenView v1.55 by Nir Sofer tells me:

MEMORY_MANAGEMENT
0x0000001a
storahci.sys
storahci.sys+658e
MS AHCI Storport Miniport Driver
10.0.15063.332 (WinBuild.160101.0800)
x64

MEMORY_MANAGEMENT
0x0000001a
USBXHCI.SYS
USBXHCI.SYS+f33d
USB XHCI Driver
10.0.15063.0 (WinBuild.160101.0800)
x64

Both Device drivers appear to be new with 10.0.15063 and are dated 6/June/2017.

Camera works fine after the restart.

***Post moved by the moderator to the appropriate forum category.***

 

Lots of BSOD's

PS: after my previous/last replie i had 3 more BSOD's:

seems like there are a lot of random once...

MEMORY_MANAGEMENT win32kbase.sys

MEMORY_MANAGEMENT ntoskrnl.exe

ntoskrnl.exe

 

Hi ovichan,

Welcome to the 10forums.

I am very sorry to say this, but it looks like I cannot help you.
This is probably because your system is windows 10 pro insider preview and I haven't been able to read dumps from insiders.

But a 0x1a error usually means bad RAM or a driver is at fault.





Diagnostic Test

RAM TEST


Run MemTest86+ - Test RAM - Windows 10 Forums



Note



MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

 

Hi axe0, thanks for answering me.

Yesterday, I did analyse the ram with memtest+ and voilá:









I imagine that is problem with modules rams, isnt??

 

I assume this pack cannot work with less then 4 sticks?
If that is not true, then you would have to test each stick in each slot separately from the other sticks and compare the results to find out if the sticks or the slots are faulty.

 

Ok, I will analyse each module separately.

 

Sorry for reposting, my question is: Should I use memtest86+ or memtest86 with support for DDR4?

Thanks.

 

I was wondering that too.
It looks like MemTest86 is the only 1 that supports DDR4 according to the changelog.
But I think that MemTest86+ should work.

 

A developer of memtest86 about memtest and bios uefi: post

 

A better link it this one: Memtest86+ does not appear to be actively maintained, but Memtest86 seems to have been monetized. Which would you use - Memtest86+ or Memtest86... and why? • r/techsupport
Almost the same, except for this part 'memtest86_does_not_appear_to_be_actively/' because with that part in the link you want to access a page that doesn't exists.

It looks like MemTest86 is the one you need.

 

Hi, again. Before of analyzing modules of ram, I decided reintall original image of Win RTM 10 (no insider), only I installed drivers that windows did not detect (wireless, bluetooth, chipset,...). After I use memtest86 6.2.0 free on UEFI version (hyperthreading disables on bios for avoiding program's hang and use parallel cores), did 8 passes without errors (is really fast).

After I use again memtest86+ with 11 passes and without errors. (I will put photos later).

I dont know what caused previous crashes, maybe corrupt installation of windows, bad drivers,...??? At the last, I think that ram is ok.

I imagine that next step is Driver Verifier - Enable and Disable in Windows 10 - Windows 10 Forums

 

Sorry for resposting. Hi again, after of finishing driver verifier I got 2 successives BSOD: Report of dm_log_collector.

I hope now you may discover the problem. Thanks in advance.

 

The crashes are all 0x1a, meaning memory problems.
The first time you had several errors with the test, but the second time not.
It is really odd that the second time there were no errors.
Because of this, the RAM needs to be checked another time.






Diagnostic Test

RAM TEST


Run MemTest86+ - Test RAM - Windows 10 Forums



Note



MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

 

Thanks for answering, like pc is on warranty I have decided to transact RMA.

When is problem of memory, is only for ram modules or includes memory cache of micro, memory graphic card and slots of mobo too, dont it?

Thanks.