Windows 10: BSOD -- Random

It looks like McAfee is now completely from your system *Smile

Please keep me posted on how your system behaves *Smile

 

well, that didn't take long

 

another BSOD sometime last nite...

 

Diagnostics Test

HDD TEST
*Arrow Check Disk (chkdsk) - Read Event Viewer Log - Windows 7 Help Forums








Diagnostic Test

RAM TEST


Run MemTest86+ - Test RAM - Windows 10 Forums



Note



MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

Make a photo of the result and post it.

Addition:
If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
If errors show up and you see them a lot later, no problem, the errors don't affect the test.

 

ran for over a day with no issues...ran hdtune today I will run other HDD tests. Do I need to do all 3 disks or just C?

 

It is highly recommended to check/scan all disks connected to the system.

 

ok...will start chkdsk /r...that is going to take a while on 3TB drive...do you see anything unusual in the scans?

 

The only point may be the reallocated sector count on your 250GB HDD.

 

really need to solve this...ran for 2 days OK then...

 

What is the scan result of the 3TB drive, or is it still running?

 

hung at 15% for a day, so I stopped it

 

Please run it again and don't interrupt it, it could take a few days before it finishes.

 

attached are results of chkdsk /r on both HDD ... did NOT check SSD

 

Those text files are copies from the command prompt, they don't contain much useful information.

 

Some important changes have been made to the file system of partition D
Code: Correcting errors in the master file table's (MFT) BITMAP attribute. Windows has made corrections to the file system.[/quote]