Windows 10: BSOD "recovered after bug check"

I have had two BSOD over the last two days, and would appreciate it if someone can look at the memory.dmp file and give me a clue how to find the culprit.

:)

 

BSOD/BUG Check 04F

Microsoft says:

M4 SSD's dropping off of mobos is stability issue, IMHO. I can replicate it, even, it's caused by making Intel MEI unstable, I think. It's not just M4's, either(I have two), you'll find nearly every SDD has one or two users with this problem. What happens, it seems, is TRIM command is sent to SDD, but it's not completed before the system shuts down, and loses power, and the queued command not being resolved causes the drive to disappear from BIOS.


as to BSOD codes, you can find the full list here. I just looked up your code.:

Bug Check Code Reference - Windows drivers | Microsoft Docs

 

BSOD/BUG Check 04F

The 04F error code is mainly a hardware error, since you have ruled out the ram, I would suggest it's either a HDD or as you mentioned a pagefile error. I would start by enlarging your pagefile to a fixed (set at min and max) 8096GB and test from there, you may find that solves your problem, as you multitask, open and close different apps the pagefile is just not clearing fast enough.

If that fails to do the job, I would suggest downloading a free HDD error checking utility, there are a few out there and many are better than the Windows offerings and give that a run and see if it comes up with anything.

 

Taskbar bug: switching to another window -will not appear at the front


Follow either of these steps to fix the issue with the Active window hiding behind.

Method 1:
I suggest you to disable window by hovering over it with the mouse and check if it helps. To do so I suggest you to try the below given steps and check if it helps:

1. Press Windows key + X key and click on Control Panel.
2. Select or click Ease of Access.
3. Click or tap onEase of Access Centre.
4. Click on Make the Mouse Easier to Use was uncheck Activate Window by hovering over it with the mouse.
5. Check if issue is resolved.

Method 2:
I would suggest you to completely uninstall the touchpad driver and reinstall it. Kindly follow the below given steps.

1. Press “Windows key + X” and click on “Device Manager”.
2. In the list of devices, you should see the touchpad drivers.
3. Right click on the device and then select "Uninstall".
4. In the uninstall dialog, make sure you select the option to delete the driver package from the system. This causes the driver package installed earlier to be deleted.
5. In the Action menu of Device manager, select “Scan for Hardware changes” option. This will cause the device driver to be reinstalled. Once the driver is installed, close all windows and restart the computer.