Windows 10: BSOD start to occurs after install new ram

I just installed an additional 32gb ram to my win 10 PC, it now has a total of 64gb. After I installed the ram, BSOF starts to happen with this code The bugcheck was: 0x0000001a 0x0000000000061948, 0x00000002001095b0, 0x0000000000000001, 0x00000002001095b0. Minidump: https://1drv.ms/u/s!AjhLyrjrcnGv3zK5s6bBVB_QM1NV?e=G1f8bpSystem info:win 10 pro 64bit up to dateAMD ryzen 9 5950xram 64gb 3200nvdia rtx 3080ti driver up to date

:)

 

BSOD after RAM upgrade

Tried all of these and nothing worked. Still got random BSOD. I also noticed I was unable to left click the start button now. I read a few posts on that and tried suggestions with no luck.

I installed this RAM not realizing there were a lot of updates that installed upon reboot. Is there anything could have damaged as a result of not updating before installing new RAM?

 

BSOD on new computer while gaming

I just got a new computer about a month ago. Everything is new and I get BSOD (windows 10) while gaming mostly although it sometimes happens while I'm just using the computer. Sometimes the computer doesn't BSOD and just gives me a Access Violation Error. Not sure if related.

Here is the link to download output files from the V2 script.

Dropbox - windows crash - Simplify your life

Any help is appreciated

Steps I have taken:

• Updated all drivers and bios to latest versions

• Checked ram with windows memory test to see if ram is faulty. (A stick was and it was removed waiting for replacement)

• Clean Installed Windows after finding faulty ram

• I had 2 x 2080Ti installed, I removed one, tested and then swapped cards; issue still exist

 

BSOD: 0x00000124 Occurs when gaming.


I have attached the zip file as per the BSOD posting Instructions.

Error as it occurs and steps taken:

• Can leave PC idle and it will not BSOD
• Can do general browsing/surfing/video viewing w/o issue
• Have performed Prime95 CPU stress test(ran for over an hour w/o issue)
• Have used "Real Temp" to verify that no cores are getting overheated. (Stays between 30-45 degrees Celsius even while gaming)
• So far the issue has only occurred when Playing games on my pc. (Games of Note include Binding of Isaac and Nuclear Throne)
• BlueScreenViewer by Nirsoft has identified the faulty driver as "Hal.dll" caused by address" hal.dll+35f1f"(this address has occurred in each BSOD.

This is a brand new PC with a fresh install of Windows 10 Home Edition x64(not an upgrade).

Have installed all up to date drivers for Chipset, Audio, and Graphics card from their respective manufacturers.

Any help in solving this issue would be appreciated.




EDIT: UPDATE:BSOD occurred an additional time. Same information from what I can gather via BluescreenViewer. Based on what little information was available online; I performed a RAM test (was shorter than I would like for 16GB worth, but it completed successfully). I then booted into BIOS and found that some voltage and other settings were manually adjusted (I didn't set this). Only thing I can figure is some of the base ASUS software I installed with the drivers changed some settings.

I have since uninstalled all unnecessary ASUS Software and changed BIOS Settings back to "Optimized Defaults". This put almost all voltage value to "Auto".

I will keep this post alive, but if I don't BSOD again by Monday I will consider it solved.

Thanks again for any help you are able to provide.