Windows 10: BSOD W/ Various Errors During Install Attempt via USB Media

I am attempting to Reinstall Windows 10 on a HP Zbook 15 that had recently crashed. The SSD has been formatted, and the RAM has been replaced with one brand new 8GB stick. With no OS installed, I updated the boot order to start with the USB and restarted the machine.Once restarted, I get the first install screen of Language, time/currency etc. and the "Install now" button.Seconds after hitting install now, I get BSOD errors every time.Various stop codes as well. Examples below...SYSTEM THREAD EXCEPTION NOT HANDLEDSYSTEM SERVICE EXCEPTIONPAGE FAULT IN NON PAGED AREAAny thoughts on what could be

:)

 

BSOD on install from USB

Have an HP Notebook 14-cf0013dx, 8gb ram, 1TB HDD 5200rpm (full specs are in profile)

Attempting to reinstall windows after BSOD on start, mostly page fault in non paged area BSOD error but can also be irql not less or equal, or Kernel Secure check failure. Saw another one or two but cannot recall at the moment.

Symptoms. Can boot to USB in UEFI or legacy and Load the windows 10 install made from the windows creation tool. The loading files completes. The system restarts and the HP splash screen appears with the windows 10 dots circling underneath for about 2 revolutions then a BSOD.

First steps:
Tried windows 10 recovery. over 48 hours still not completed.
Ran HP hardware diagnostics, Memory HDD, system board all passed.
Ran memtest86 from Hirens Boot CD. passed.
Ran seagate HDD test. passed.
Tried windows 10 USB install after each step above.
Tried Windows 10 safe mode installation, was able to get through installation but on reboot the same results, BSOD within 3 revolutions of startup dot-circle.

Second steps:
Removed HDD, hooked up to main computer and did a CMD, DISKPART, CLEAN
Updated BIOS to most recent version F.53 to support windows 10 v.1909
Moved DIMM from slot 1 to slot 2
Tried HP cloud recovery with exact same results as listed above.
Tried Windows 10 USB safemode install again same results. Was able to complete installation from USB but BSOD on restart.

Short of replacing the Motherboard due to the integrated graphics memory (which still tested good in HP system board test), I am at a loss. Please help with any suggestions.

 

Error when installing Win7

when Installing Windows 7 I get an error saying ""A required CD/DVD drive device driver is missing. If you have a floppy disk, CD, DVD, or USB flash drive, please insert it now. Note: If the windows installation media is in the CD/DVD drive, you can safely remove it for this step." What should I do to get Windows to install?

 

Error code when attempting to 'Refresh' Window's 10/ create installation Media

So... all of this was answered in the initial post but I'll make it more obvious.

• Are you trying to perform a new or clean installation?

Clean.

• Is there a Windows operating system currently installed on that specific device?

Yes, Windows 10 is currently installed. I upgraded to Windows 10 from 8 during the promotion period.

• If there's no Windows operating system currently installed, which Windows operating system was installed on that specific device?

10...

• Where or how exactly are you trying to create an installation media?

I have attempted to:

1. Create the media on a Flash Drive as apparent by the images

2. Create the ISO file directly onto the computer,
to be written to a CD.

In the meantime, we suggest that you reformat the USB device where you're trying to download Windows 10 to,

Yes, this has been done, and I downloaded the MediaCreationTool from the website at that exact link.

The USB has sufficient space. I have attempted to write this file to an external harddrive, 4 usb devices, and the desktop of the laptop itself.