Windows 10: BSOD WHEA_UNCORRECTABLE_ERROR happening regularly

Getting a regular BSOD several times a day without any noticeable triggers, even when the PC is idle or just playing a movie. Minidump files seem to point to PSHED.dll and other threads seem to identify this as a hardware issue, but I'm unsure which hardware in my PC is malfunctioning. There's been no new hardware installed recently. Is there any info in my minidumps that someone can explain to me?Onedrive share link to my minidumps: Minidumps-14-06-2024My PC is custom built by myself, over 7 years ago and hasn't had any issues until about a month ago when this started happeningOS: Windows 1

:)

 

WHEA_UNCORRECTABLE_ERROR happening several times a day

Haven't got to uninstall/reinstall the drivers yet but please find attached the rest of the steps requested.

debug steps.txt

 

BSOD regularly WHEA_UNCORRECTABLE_ERROR

STOP 0x124 Troubleshooting [/i] Read carefully before proceeding.



Warning

If you're overclocking your system, revert back to stock clocks now.





Note Test the system once the overclock is removed before continuing with the steps outlined below.

Part Two: MemTest86+ RAM Diagnostic
Part Three: Hard Drive Diagnostics
Part Four: GPU Stress Test




TWO [/i] RAM TEST
*Arrow Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums



Note



MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

Make a photo of the result and post it please.

Addition:
If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
If errors show up and you see them a lot later, no problem, the errors don't affect the test.




THREE [/i] HDD TEST


Note Please run HDTune first, in the order posted!
*Arrow Run HDTune to

• check the health,
• scan for errors, no quick scan but full scan
• run a benchmark.

It may take some time, but please take the time you need to perform it properly.
When above is done please make screenshots of the following

• the health,
• the error scan,
• the benchmark incl. following
  • transfer rate,
  • access time,
  • burst rate,
  • cpu usage.

*Arrow Run SeaTools DOS to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
Run the long test.


Note Do not run SeaTools on an SSD as the results will be invalid.
Make a photo of the result and post it.

*Arrow Run chkdsk
Disk Check - Windows 7 Help Forums
Use option TWO with parameter /r
Upload the chkdsk log *Arrow Check Disk (chkdsk) - Read Event Viewer Log - Windows 7 Help Forums




FOUR [/i] GPU TEST
*Arrow Run Furmark to stress test your GPU. FurMark - GPU Stress Test - Windows 10 Forums



Note Run Furmark for around 30 minutes.


Warning Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if overheating occurs.
Make a photo of the result and post it.

In Furmark you can find a tool called 'GPU-Z' (if you want to install GPU-Z is up to you), when GPU-Z is open click on the 'Sensors' tab, on this tab you can monitor

• the frequency of the GPU,
• the GPU memory clock,
• the temperature,
• the power,
• the load on the GPU,
• Etc.

I would like you to make a screenshot of GPU-Z after you have either cancelled Furmark for any reason or Furmark is finished, post this screenshot in your next reply with the result of Furmark.

 

WHEA_UNCORRECTABLE_ERROR happening several times a day

Results from Seagate scans. Currently running HD Tune scans. No more BSODs....so far....