Windows 10: BSOD while gaming; Memory Management, System Thread Exc., IRQL Not...

I've looked far and wide through these forums searching for the cause, but I'm at my technological wits end to go further alone. I've recently rebuilt my PC; new CPU, new ram, new gpu, new mobo... it should all be fine, I think, but I'm getting these errors only when I'm playing video games.

SYSTEM SPECS:
MOBO: MSI B350 GAMING PRO
GPU: EVGA GTX 1060 6GB
RAM: Corsair Vengeance LPX 16GB (8x2GB) 2400
CPU: Ryzen 5 1600

I've checked and monitored the temps, and they seem to be fine.

I ran windows memory diagnostic, and that came back clean.

I've run memtest86 for about 3 passes per stick, and it seemed okay... going to do a more comprehensive test of this tonight, once I go to bed.

These are the whocrashed results.

On Thu 8/3/2017 3:59:56 PM your computer crashed
crash dump file: C:\Windows\Minidump\080317-20375-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14F960)
Bugcheck code: 0xA (0xFFFF9A8376F2CB00, 0xFF, 0x0, 0xFFFFF80184AFE53E)
Error: IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Thu 8/3/2017 12:26:36 PM your computer crashed
crash dump file: C:\Windows\Minidump\080317-20609-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x1F1440)
Bugcheck code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF8020A870440, 0xFFFFD000C8FE1128, 0xFFFFD000C8FE0960)
Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a system thread generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Wed 8/2/2017 11:00:16 PM your computer crashed
crash dump file: C:\Windows\Minidump\080217-15171-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x149F90)
Bugcheck code: 0x1A (0x41289, 0x7FFAB39B2000, 0x1578, 0x7DFAB39B2205)
Error: MEMORY_MANAGEMENT
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a severe memory management error occurred.
This might be a case of memory corruption. More often memory corruption happens because of software errors in buggy drivers, not because of faulty RAM modules. This problem might also be caused because of overheating (thermal issue).
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Wed 8/2/2017 11:00:16 PM your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bugcheck code: 0x1A (0x41289, 0x7FFAB39B2000, 0x1578, 0x7DFAB39B2205)
Error: MEMORY_MANAGEMENT
Bug check description: This indicates that a severe memory management error occurred.
This might be a case of memory corruption. More often memory corruption happens because of software errors in buggy drivers, not because of faulty RAM modules. This problem might also be caused because of overheating (thermal issue).
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Wed 8/2/2017 3:19:20 PM your computer crashed
crash dump file: C:\Windows\Minidump\080217-14734-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x149F90)
Bugcheck code: 0x1A (0x41793, 0xFFFFC580C496F770, 0x1F, 0x1E)
Error: MEMORY_MANAGEMENT
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a severe memory management error occurred.
This might be a case of memory corruption. More often memory corruption happens because of software errors in buggy drivers, not because of faulty RAM modules. This problem might also be caused because of overheating (thermal issue).
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.


I honestly don't know what else to do. Maybe a more comprehensive eight-hour memtest will yield some results, but if somebody could help me with the dumps just to make sure it isn't drivers/there aren't any explicit obvious signs that point to a fault... that would be very helpful.

Thank you for reading.

:)

 

Windows 10 boot loop

It starts to have bootloop one day so I tried re-formatting the computer but it seems to get bsod when the dots start spinning. So I wipe clean the SSD using another computer hoping to make a fresh install
but the problem still persist. Everytime I got a BSOD, the stop code is different. Here are the list of stop codes I received everytime i got a BSOD

-memory management

-system thread exception not handled

-kmode exception not handled-attempted execute of noexecute memory

-page fault in nonpaged area windows 10

-kernel auto boost lock acquisition with raised irql

-system service exception

-unexpected store exception

-kernel security check failure

 

Windows 10 bsod

I was using my laptop and it crashed and now everytime it tries to boot i get a bsod . i cant acces safe mode or autonatic repair and each time its a differwnt bsod.like aystem thread not handles , memory management , driver irql not less or epual , driver
corrupted expool , etc . And i dont have a repair or recovery disk

 

Hi warpapa ,

The bsod mini dump files when debugged indicate memory problems.

1) Run memtest86+ version 5.01 for at least 8 runs.

This may take many hours so plan to run it overnight.
Memtest86+ - Advanced Memory Diagnostic Tool
When Memtest86+ has completed 8 or more runs use a camera or a smart phone camera to make an image of the results to post into the thread.
Memory problems. - Microsoft Community

MemTest86+ - Test RAM Windows 10 BSOD Tutorials

It may take 1 - 2 hours /GB RAM for the testing to complete 8 passes.
Anything less that 8 passes is an incomplete test and is wasting time.
If there is 1 error that is a failed test and testing can be aborted.
There is 16 GB of RAM on 2 DIMM
If testing both RAM at one time displays 1 error then stop testing both and test 1 RAM at a time in the same DIMM.
This will differentiate the good from the malfunctioning RAM.
If both RAM pass in the same DIMM then check the next DIMM with the RAM that passed.
This will then check the DIMM/MB

Again the time does not differentiate good from bad testing.
It is the number of passes.
Anything less that 8 passes has too high an incidence of false negatives.
That is it indicates RAM is ok because the testing was inadequate.
The more passes that are made the less the problems with false negatives.
Please use a camera to make a picture and post the image or images into the thread.



2) open administrative command prompt and type or copy and paste:
3) sfc /scannow
4) dism /online /cleanup-image /restorehealth

5) When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on edit then copy > paste into the thread





Code: BugCheck 1A, {41793, ffffc580c496f770, 1f, 1e}Probably caused by : memory_corruption[/quote] Code: BugCheck A, {ffff9a8376f2cb00, ff, 0, fffff80184afe53e}Probably caused by : memory_corruption[/quote] Code: BugCheck 1000007E, {ffffffffc0000005, fffff8020a870440, ffffd000c8fe1128, ffffd000c8fe0960}Probably caused by : memory_corruption[/quote] Code: 8/2/2017 5:49 AM Application Error Faulting application name: ZeroConfigService.exe, version: 19.60.0.0, time stamp: 0x58eb9957 Faulting module name: KERNELBASE.dll, version: 10.0.14393.0, time stamp: 0x57899809 Exception code: 0xc06d007e Fault offset: 0x0000000000017788 Faulting process id: 0x31a0 Faulting application start time: 0x01d30b53287577a7 Faulting application path: C:\Program Files\Intel\WiFi\bin\ZeroConfigService.exe Faulting module path: C:\Windows\System32\KERNELBASE.dll Report Id: 5b6aa6be-f499-48ec-b77b-70161672ebfe Faulting package full name: Faulting package-relative application ID:8/3/2017 5:09 PM Application Error Faulting application name: ZeroConfigService.exe, version: 19.60.0.0, time stamp: 0x58eb9957 Faulting module name: ZeroConfigService.exe, version: 19.60.0.0, time stamp: 0x58eb9957 Exception code: 0xc0000409 Fault offset: 0x000000000022af80 Faulting process id: 0xa0c Faulting application start time: 0x01d30c797a4ee1cf Faulting application path: C:\Program Files\Intel\WiFi\bin\ZeroConfigService.exe Faulting module path: C:\Program Files\Intel\WiFi\bin\ZeroConfigService.exe Report Id: 65d89c6b-1ef5-4bfa-b3a5-91d6703b97b3 Faulting package full name: Faulting package-relative application ID:8/2/2017 7:35 PM Application Error Faulting application name: ZeroConfigService.exe, version: 19.60.0.0, time stamp: 0x58eb9957 Faulting module name: ZeroConfigService.exe, version: 19.60.0.0, time stamp: 0x58eb9957 Exception code: 0xc0000409 Fault offset: 0x000000000022af80 Faulting process id: 0xa94 Faulting application start time: 0x01d30bc46c44aa8b Faulting application path: C:\Program Files\Intel\WiFi\bin\ZeroConfigService.exe Faulting module path: C:\Program Files\Intel\WiFi\bin\ZeroConfigService.exe Report Id: 1b422920-0151-4717-a033-7c1e0fdc4247 Faulting package full name: Faulting package-relative application ID:8/3/2017 7:00 PM Application Error Faulting application name: ZeroConfigService.exe, version: 19.60.0.0, time stamp: 0x58eb9957 Faulting module name: ZeroConfigService.exe, version: 19.60.0.0, time stamp: 0x58eb9957 Exception code: 0xc0000409 Fault offset: 0x000000000022af80 Faulting process id: 0xab4 Faulting application start time: 0x01d30c8a7d81ec6f Faulting application path: C:\Program Files\Intel\WiFi\bin\ZeroConfigService.exe Faulting module path: C:\Program Files\Intel\WiFi\bin\ZeroConfigService.exe Report Id: 0615eece-06ad-4a5e-8b42-2f118592b4d2 Faulting package full name: Faulting package-relative application ID:8/3/2017 6:06 AM Application Error Faulting application name: ZeroConfigService.exe, version: 19.60.0.0, time stamp: 0x58eb9957 Faulting module name: ZeroConfigService.exe, version: 19.60.0.0, time stamp: 0x58eb9957 Exception code: 0xc0000409 Fault offset: 0x000000000022af80 Faulting process id: 0xad0 Faulting application start time: 0x01d30c0c0f7a3815 Faulting application path: C:\Program Files\Intel\WiFi\bin\ZeroConfigService.exe Faulting module path: C:\Program Files\Intel\WiFi\bin\ZeroConfigService.exe Report Id: 075e0725-4d31-4185-9a00-9add81299ce8 Faulting package full name: Faulting package-relative application ID:8/3/2017 3:02 AM Application Error Faulting application name: ZeroConfigService.exe, version: 19.60.0.0, time stamp: 0x58eb9957 Faulting module name: ZeroConfigService.exe, version: 19.60.0.0, time stamp: 0x58eb9957 Exception code: 0xc0000409 Fault offset: 0x000000000022af80 Faulting process id: 0xb20 Faulting application start time: 0x01d30c04cb1e6331 Faulting application path: C:\Program Files\Intel\WiFi\bin\ZeroConfigService.exe Faulting module path: C:\Program Files\Intel\WiFi\bin\ZeroConfigService.exe Report Id: cb2c0cf6-b42d-4cce-bae0-767ba1d809d4 Faulting package full name: Faulting package-relative application ID:8/3/2017 4:49 PM Application Error Faulting application name: ZeroConfigService.exe, version: 19.60.0.0, time stamp: 0x58eb9957 Faulting module name: ZeroConfigService.exe, version: 19.60.0.0, time stamp: 0x58eb9957 Exception code: 0xc0000409 Fault offset: 0x000000000022af80 Faulting process id: 0xb68 Faulting application start time: 0x01d30c7572423b9c Faulting application path: C:\Program Files\Intel\WiFi\bin\ZeroConfigService.exe Faulting module path: C:\Program Files\Intel\WiFi\bin\ZeroConfigService.exe Report Id: 8bc8fe8d-77f8-4226-afe0-1697b8002d9e Faulting package full name: Faulting package-relative application ID:[/quote]

 

Woowee! That all took some time, but here we go.

Step 1. Memtest 86 Results - took pictures and saved the html results. Pictures first (of both screens after it completed) and then the HTML results. I'll post an imgur link and also upload the direct files.
Attachment 147060Attachment 147062Attachment 147061

Imgur: The most awesome images on the Internet

Steps 2-5. Command Prompt runs finished - hopefully I pasted them in right.

Microsoft Windows [Version 10.0.14393]
(c) 2016 Microsoft Corporation. All rights reserved.


C:\Windows\system32>sfc /scannow


Beginning system scan. This process will take some time.


Beginning verification phase of system scan.
Verification 100% complete.


Windows Resource Protection found corrupt files and successfully repaired
them. Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For
example C:\Windows\Logs\CBS\CBS.log. Note that logging is currently not
supported in offline servicing scenarios.


C:\Windows\system32>dism /online /cleanup-image /restorehealth


Deployment Image Servicing and Management tool
Version: 10.0.14393.0


Image Version: 10.0.14393.0


[==========================100.0%==========================] The restore operation completed successfully.
The operation completed successfully.


C:\Windows\system32>

 

Hello warpapa *Smile

I noticed that there is a more recent BIOS for your system that might have some improved memory compatibility. This would be worth trying.

 

Do you think at this point I can just overwrite the memtest86 USB? I'm not really sure how to update bios... I heard I just need to download the file for the update to my USB, and run m-flash?

Also, thanks for all the help so far.

 

The memtest86 USB will be very useful for future testing so it would be worth keeping it but if you do not have another USB drive then you will just have to reuse it and create it again later.

The BIOS update process is well documented on the MSI website, there is both a video and pdf file:
https://msi.com/Motherboard/support/...AMING-PRO.html

 

Tentatively seems the BIOS update has fixed all my problems... I'll monitor it for the next day or two; thank you, Philc! *Smile

 

You are welcome, I hope it continue to work for you!

 

1) Open administrative command prompt and type or copy and paste:
chkdsk /scan

When this has completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on edit then copy > paste into the thread



2) turn off windows fast startup:
Turn On or Off Fast Startup in Windows 10 Windows 10 Performance Maintenance Tutorials

3) ordinarily we have all OP use memtest86+ for testing memory as the software testing differs by each vendor.
What can we do to make the link to click on easier for the next OP?
Should there be more links so that they are easier to find?
Should a comment be made to only use one web site?
Should a comment be made not to use the other web sites?
Please indicate how you made the choice?

4) please post a follow up zip after a few more days of monitoring:
BSOD - Posting Instructions - Windows 10 Forums

Code: Windows failed fast startup with error status 0xC00000D4.[/quote]