Windows 10: BSOD while heavy use of pc

Hello, I've build a new pc recently and have been having some issues. When I first built it, and while trying to play Deus Ex: Mankind Divided, I kept getting BSODs. I followed some info online (it was a couple of weeks ago and don't remember what I did besides updating some drivers), then my pc was working just fine. I ordered a new nvme ssd and did a fresh install of Windows 10 on it. Now I'm playing RDR 2 and am having the same issue, however, updating drivers did not correct the issue. I have tested two sets of ram with the system, both tested without errors. However, the ram I currently have in the pc, I have made the timings in the bios what they are rated for and tuned the Infinity Fabric to 1600mhz. I did try the ram out at the default settings for bit and the pc was running fine while playing RDR 2 for about a hour (it takes roughly 15 to 30 mins for the BSOD to happen), but I didn't have them on default for too long. My gpu and cpu are not overclocked. I have tested both of them with AIDA64 without issue. The only other game I have installed and have played is Prey 2017 and I have played that game for hours without having a BSOD. Any help is appreciated. And if any more info is needed, let me know. Thank you.

Windows Version: Build 19042.870

Here is the OneDrive link for log collector file: Microsoft OneDrive - Access files anywhere. Create docs with free Office Online.

:)

 

PC reboots (no BSOD) on CPU stress

Hi fellow TPU members,

not too long ago, the box my gf's PC was transported in gave way on the stairs. Yes, you got it right, that sent a PC tumbling down a flight of steps alright.

Stuff broke. Also, stuff remained intact somehow.

I bought her a new case, new CPU cooler and we removed the floppy drive, so far so good. But the PC started crashing for no apparent reason, without a BSOD.

I tested:

• Memtest86+, left overnight, 0 errors
• Scanned the HDD for errors, nothing there
• Left FurMark burning up the GFX card and drawing some power, no problems there
• Ran Ubuntu from a Live CD doing nothing special, didn't crash
• Ran OCCT, Linpack, Prime95, all 3 caused reboots within minutes
• Oh, and I disabled "Restart on error" so I'm sure it's not a BSOD.

Now, I can still try and test something CPU intensive on Ubuntu, but my guess is the CPU didn't survive.
Before I do anything drastic like whippin' out the magic wallet and get her a new AMD quad, is there anything I didn't see?
I'm guessing the motherboard could be borkered as well, but can I check that other than replacing the CPU with a working one?
Any suggestions on which proggies I can use from an Ubuntu Live CD to stress the CPU?

 

BSOD- atikmpag.sys

This is most likely due to an installation/upgrade error with ATI driver's. I suggest doing DriveSweeper and the following:

• Drivesweeper all drivers & in Safe Mode
• Unistall all drivers that aren't used in DriveSweeper (CCC Profiler Updates, MSI AfterBurner, anything related to ATI that use's it's drivers.)
• After you do this, the first thing you need to do is go into Device Manager and Unistall your ATI Drivers

Once your done, restart the PC and then try installing the latest drivers.


I had several issues with this in the past, but I overcame it with logical reasoning and whenever I have a driver issue, I just use these steps and I always overcome the problem.

Best of luck! *Toast :toast:

 

PC Freeze on Heavy use/streaming w/ Gaming

Thanks zbook - see below screenshots. All looks well, to my untrained eye?

Drive 1: data drive - HDD










Drive 2: SSD