Windows 10: BSOD While Powering Up From Sleep - 0x000000BE (ATTEMPTED WRITE TO REA

I had tons of issues in the past with BSOD of all sorts on this machine. I eventually did a Windows reset once one of the Windows kernel files became corrupt. This is the first BSOD I've had since the reset. Happened while powering on from Sleep.

I have run MemTest in the past (about 3 weeks ago) and it took 5 days total to run as I have 32gb RAM. I ran the full 8 passes with no issues found, so I really don't want to have to do that again!

Any help provided is really appreciated!

Thanks

:)

 

Another BSOD Attempted to write readonly from sleep Windows 10 (dmp inside)

Hello Angus,

Thank you for posting your question on Microsoft community.

I appreciate you for providing details about the issue and your efforts towards resolving it.

This issue may occur due to software conflicts. This may also happen due to corrupt installed drivers.

To diagnose the issue, start the computer in safe mode
and check if it helps.

Safe mode is a diagnostic mode for Windows that starts your computer in a limited state. Only the basic files and drivers necessary to run Windows are started. This helps us in identifying whether the issue is due to some third party programs
conflict. Please follow these steps:

a. Type settings in search and then click settings.

b. Click update and recovery and then click recovery.

c. Under advanced startup, click restart now.

d. Once your PC restarts, on choose an option screen, click
troubleshoot.

e. If you don't see startup settings option, click advanced options.

f. Click startup settings and then click restart.

g. On startup settings screen, choose safe mode.

h. Sign in to your PC with a user account that has administrator rights.

If the issue does not persist in safe mode, then perform clean boot.

Refer this article:

How to perform a clean boot in Windows

https://support.microsoft.com/en-us/kb/929135

(Also holds good for Windows 10)

Note: After you have finished troubleshooting, follow these steps from
section “How to reset the computer to start as usual after clean boot troubleshooting”
to reset the computer to start as usual.

Please also update all motherboard drivers from the computer manufacturer's website and check the issue. You may also follow these steps:

a. Press Windows + X keys and click device manager.

b. Find the driver, right click on it, click "Update Driver Software" and follow on-screen instructions.

I hope this information helps.

Please do let us know if you need any further assistance.

Thank you

 

Another BSOD Attempted to write readonly from sleep Windows 10 (dmp inside)

Hello everyone, I've seen several threads similar to this one before, but none of the solutions have fixed my problem.

Basically, when my win7-win10 upgraded pc wakes from sleep, it crashes. I had problems that prevented my computer from sleeping before, which led me to disable my creative audio drivers and use the mobo's audio instead.

I ran through some of the similar threads, stressed the drivers with verifier, and here's the .dmp that resulted:

Microsoft OneDrive - Access files anywhere. Create docs with free Office Online.

this dmp occurred on start-up after using verifier to stress. I disabled the stress, computer starts fine, still restarts on wake from sleep.

No other weirdness besides from the earlier reported audio issues. Those drivers are no longer on the computer so I do not think they are connected, but figured it was relevant information.

 

Do u use Chrome? Probably Chrome dosen`t like your ram. Change Chrome with firefox at let see what happen.

 

There was 1 bsod mini dump file and no definitive misbehaving driver.

Windows driver verifier is a tool that is used to find misbehaving drivers.
It will repetitively produce bsod until misbehaving drivers are fixed or until it is turned off.

Please review these links:

Microsoft Community

Microsoft Community

Enable and Disable Driver Verifier in Windows 10 Windows 10 Performance Maintenance Tutorials

1) Open administrative command prompt and type or copy and paste:
2) sfc /scannow
3) dism /online /cleanup-image /restorehealth
4) chkdsk /scan
5) When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on edit then copy > paste into the thread

6) shutdown /r /o /f /t 00
When the computer reboots it will open the windows recovery or windows advanced troubleshooting menu.
Navigate through the windows advanced troubleshooting menu to the various methods to turn off windows driver verifier:
These commands are only when verifier is already in use:
1) startup options (not startup repair) > select #6 safe mode with command prompt > type: verifier /reset
2) command prompt > opens Administrator X: \Windows\system32\cmd.exe > type: verifier /bootmode resetonbootfail
3) restore
When using windows driver verifer it should be turned off using #1. Only if #1 fails should #2 be used. And only if #2 fails should #3 be used. Using restore will lead to a loss of the bsod mini dump and little progress will be made in analysis of the mini dump files.

Having time to view the bsod window can be accomplished by unchecking automatic restart in this link:
Microsoft Community


Command to start using windows driver verifier and custom settings are in this link:
Microsoft Community

Methods to turn off windows driver verifier are in this link:
Enable and Disable Driver Verifier in Windows 10 Windows 10 Performance Maintenance Tutorials