Windows 10: BSOD while working random BSOD

SONY_ROBERT-ma_05-02-2018_122114,67.zip

:)

 

While i was playing rust i got this random bsod

Original Title: New bsod some help please

Hello everyone, today while i was playing rust i got this random bsod it never happened before on my new system everything was working fine i have windows 10 16 GB ram,and gt x 970 graphic card can someone please check the bsod for me thank you all

Dropbox - Error

 

ntoskrnl.exe+1640e0 BSOD error

So far, with one memory chip no BSOD. But, getting a BSOD would be random and infrequent.

I've went through that article in the past and still have gotten BSOD.

 

Diagnostic Test

RAM TEST


Run MemTest86+ - Test RAM - Windows 10 Forums



Note



MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

Make a photo of the result and post it.

Addition:
If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
If errors show up and you see them a lot later, no problem, the errors don't affect the test.

 

Well i brought it to a computer ''specialist'' got it returned to me in 3 days with the comment, it has not given blue screens in ,1,5 days so it is fixed, payed €90,- for service.
1 day later blue screen again.
And memtest86 will just work till 21% then it stalls.

 

Means either something's wrong with the RAM, motherboard or CPU.

If you have warranty, you should use it to either get the RAM or laptop replaced. Backup any data you don't want to loose beforehand.

 

i finally got memtest to run.
These are the results:

 

You get the best results with MemTest86+, not MemTest86.

 

Alright i will run the program tonight.

 

Hi robertvorgers,

How is the test going?

 

Try doing a wiggle test on your power cords. While the system is running (CAREFULLY as you can get electrocuted if you touch the wrong part) jiggle all of the power cords in the computer. If one causes BSOD, replace that cord. If your PSU cannot deliver clean power, systems tend to fail like this.

 

What i did now, since memtest86+ would not run is change the ram chips around, after this it has not shown any BSOD.
I will do a wiggle test tonight and give the results.
Thanks for the help so far.