Windows 10: BSOD WITH nvlddmkm.sys That caused the error

I've been experiencing this problem a lot of times with a long period.I've tried every solution possible with many times to reinstall the driver ,with programs or not ,older or latest version, even reset my pc multiple times.I've searched on youtube and google to find a solution untill I found one has to do with the file nvlddmkm.sys itself, about rename it and copy it to another location etc.Well .. I can access my pc in the safe mode only .. so, I found the file nvlddmkm.sys two times The first is at C:\Windows\System32\DriverStore\FileRepository\nv_dispig.inf_amd64_0afec3f2050014a0And the s

:)

 

QCAMAIN1.SYS CAUSING BSOD

This was probably caused by the following module:
qcamain1.sys (Qcamain10x64+0x108678)

Bugcheck code: 0x1D3 (0x333, 0x0, 0x0, 0x0)

Error: CUSTOM_ERROR

A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: qcamain1.sys .

Google query: qcamain1.sys CUSTOM_ERROR

Using WhoCrashed I found this thread: Redirecting however without
solution, locked.

I did get BSOD almost everytime I moved the laptop.

This worked for me:

unscrew wifi module, push a little into the socket. Screw in. DONE

 

BSOD while using the internet. error (L1C63x64.sys)


Hi trainman81,

Welcome to the 10forums.

Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover.

1. Uninstall Daemon Tools
2. Download the SPTD standalone installer and follow these steps:
   • Double click the executable to open it
   • Click on the button shown below

If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window


AVG is trying to request data from the internet, which is why the network driver is marked as the cause.
Code:

Code:

*** WARNING: Unable to verify timestamp for L1C63x64.sys *** ERROR: Module load completed but symbols could not be loaded for L1C63x64.sys 0: kd> lmvm L1C63x64 start             end                 module name fffff801`89700000 fffff801`89722000   L1C63x64 T (no symbols)                Loaded symbol image file: L1C63x64.sys     Image path: \SystemRoot\System32\drivers\L1C63x64.sys     Image name: L1C63x64.sys     Timestamp:        Mon Apr 01 05:15:17 2013 (5158FBC5)     CheckSum:         000245C4     ImageSize:        00022000     Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

AVG drivers that have been flagged
Code:

Code:

*** WARNING: Unable to verify timestamp for avgwfpa.sys *** ERROR: Module load completed but symbols could not be loaded for avgwfpa.sys *** WARNING: Unable to verify timestamp for avgfwd6a.sys *** ERROR: Module load completed but symbols could not be loaded for avgfwd6a.sys

Please uninstall AVG and see if it helps
Uninstall AVG | AVG
It is further recommended to check your Qualcomm network driver for updates, its driver is not supported for Windows 10.
Driver Reference Table - L1C63x64.sys

 

BSOD Caused by nvlddmkm.sys

I have listed below a number of Eventlog entries from the last 2 days:

Code:

There was also the following entry which will explain why you are not always getting the crash dump files:





Some things to do:

1. Turn off Fast Start-up
2. Consider putting the pagefile back to the C: drive while troubleshooting
3. try removing all the Nvidia stuff with DDU and then just reinstall the latest driver and PhysX

If you need more help on how to do the above just ask or look up in the tutorials.