Windows 10: BSOD without clear error

Hello, I have multiple BSOD already, but i don't know what the causes are. I tried to stress test my cpu and gpu without any problems. The Ram is tested with Windows Memory Diagnostic. So I assume that the only thing left is the motherboard.The computer has rebooted from a bugcheck. The bugcheck was: 0x00020001 0x0000000000000011, 0x00000000002f680c, 0x0000000000001005, 0xffffe70001605be0. A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: eda34de8-d790-4ac1-8593-f5ba9

:)

 

BSOD - Registry Error

Your BSOD code is 0X000000051

Here's the Google search I did for it: https://www.google.com/search?q=0x0...j5.399j0j7&sourceid=chrome&es_sm=122&ie=UTF-8

There is a hotfix available that might help, https://support.microsoft.com/en-us/kb/810558

This thread makes a few good suggestions too: http://www.sevenforums.com/bsod-hel...dows-7-pro-sp1-registry-error-0x00000051.html

+1 to listing your full system specs, OS version, etc. I did only look at your BSOD log file.

Run a Diskchk /R (I know you already ran one, so you can skip this)

Run SFC /SCANNOW

Report back.

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.

 

Clear Pagefile on Shutdown


I've been looking into clearing the pagefile, and I found the following steps at a somewhat dated webpage:

1. In the registry editor, navigate to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management
2. Set ClearPageFileAtShutdown to the REG_DWORD value of 1.
3. Restart Windows.

I'm just wondering whether those steps are still valid, and, if so, does clearing the pagefile work as advertised?