Windows 10: BSODS after RAM upgrade

Discus and support BSODS after RAM upgrade in Windows 10 BSOD Crashes and Debugging to solve the problem; My computer has been experiencing BSODs after a recent RAM upgrade. RAM was installed in the same slots as the previous. I've also tried updating... Discussion in 'Windows 10 BSOD Crashes and Debugging' started by EternalEclipse_213, Jul 19, 2020.

  1. ETERNALECLIPSE_213
    EternalEclipse_213 Win User

    BSODS after RAM upgrade


    My computer has been experiencing BSODs after a recent RAM upgrade. RAM was installed in the same slots as the previous. I've also tried updating drivers through device manager, got some BSODs there while updating them. Also tried running system file check on CMD, which it said it found a corrupt file, but couldnt fix it. Started it up in safe mode and it was fine. Didn't find the corrupt file there. Here are the dump files https://1drv.ms/u/s!AmxZrlcO8g9hjDuz4VZoVhNT1vJV?e=lnvxXw
    Thanks

    :)
     
    EternalEclipse_213, Jul 19, 2020
    #1
  2. UNLGRAD2002
    unlgrad2002 Win User

    BSOD after RAM upgrade

    Tried all of these and nothing worked. Still got random BSOD. I also noticed I was unable to left click the start button now. I read a few posts on that and tried suggestions with no luck.

    I installed this RAM not realizing there were a lot of updates that installed upon reboot. Is there anything could have damaged as a result of not updating before installing new RAM?
     
    unlgrad2002, Jul 19, 2020
    #2
  3. ITSMEITSME
    itsmeitsme Win User
    Video card or RAM need upgrading?

    Memtest: no errors after 10 hrs.
    I'm going to perform the Primetest, later on. Get back to you on that.
    I'm going to take it step by step, guys. I need to find the problem with this current computer. I might have to upgrade some components, so that it is still runnable. As for the new one, yes....i will build on it later. I need to find something decent 'gaming experience', all suggestions appreciated. THanks.
     
    itsmeitsme, Jul 19, 2020
    #3
  4. ALEXSUBRI
    alexsubri Win User

    BSODS after RAM upgrade

    BSOD- atikmpag.sys

    This is most likely due to an installation/upgrade error with ATI driver's. I suggest doing DriveSweeper and the following:
    • Drivesweeper all drivers & in Safe Mode
    • Unistall all drivers that aren't used in DriveSweeper (CCC Profiler Updates, MSI AfterBurner, anything related to ATI that use's it's drivers.)
    • After you do this, the first thing you need to do is go into Device Manager and Unistall your ATI Drivers
    BSODS after RAM upgrade [​IMG]


    Once your done, restart the PC and then try installing the latest drivers.


    I had several issues with this in the past, but I overcame it with logical reasoning and whenever I have a driver issue, I just use these steps and I always overcome the problem.

    Best of luck! *Toast :toast:
     
    alexsubri, Jul 19, 2020
    #4
Thema:

BSODS after RAM upgrade

Loading...

  1. BSODS after RAM upgrade - Similar Threads - BSODS RAM upgrade

  2. Windows BSOD after ram upgrade

    in Windows 10 Gaming
    Windows BSOD after ram upgrade: I have a x99-a motherboard with an i7 5960x coupled with quad channel 4x4gb=16gb ram for many years running fine. Just last week a friend gave me a pack quad channel 64 gb ram 4x16, so I gave it a try. Installed it, tried it for the whole day no problem. Then at day end I was...

  3. Windows BSOD after ram upgrade

    in Windows 10 Software and Apps
    Windows BSOD after ram upgrade: I have a x99-a motherboard with an i7 5960x coupled with quad channel 4x4gb=16gb ram for many years running fine. Just last week a friend gave me a pack quad channel 64 gb ram 4x16, so I gave it a try. Installed it, tried it for the whole day no problem. Then at day end I was...

  4. Windows BSOD after ram upgrade

    in Windows 10 BSOD Crashes and Debugging
    Windows BSOD after ram upgrade: I have a x99-a motherboard with an i7 5960x coupled with quad channel 4x4gb=16gb ram for many years running fine. Just last week a friend gave me a pack quad channel 64 gb ram 4x16, so I gave it a try. Installed it, tried it for the whole day no problem. Then at day end I was...

  5. bsod showing randomly after upgrading ram

    in Windows 10 Gaming
    bsod showing randomly after upgrading ram: I upgraded my laptop's ram from 4gb to 12gb by adding an 8gb ram stick , its been two times that the bsod pops up with error "page fault in nonpaged area" and one about memory.what should i do???...

  6. bsod showing randomly after upgrading ram

    in Windows 10 Software and Apps
    bsod showing randomly after upgrading ram: I upgraded my laptop's ram from 4gb to 12gb by adding an 8gb ram stick , its been two times that the bsod pops up with error "page fault in nonpaged area" and one about memory.what should i do???...

  7. bsod showing randomly after upgrading ram

    in Windows 10 BSOD Crashes and Debugging
    bsod showing randomly after upgrading ram: I upgraded my laptop's ram from 4gb to 12gb by adding an 8gb ram stick , its been two times that the bsod pops up with error "page fault in nonpaged area" and one about memory.what should i do???...

  8. BSOD After Ram Upgrade??

    in Windows 10 Ask Insider
    BSOD After Ram Upgrade??: I upgraded from house-branded cheap 16GB to Corsair 32GB 2600Mhz. Since booting with new RAM, BSOD often, varying every 10min to 30min. I ram the memory diag with new RAM and it threw no problems. I also did the PowerShell verify thing and it crashed on me. Any ideas? I...

  9. BSOD after RAM upgrade

    in Windows 10 BSOD Crashes and Debugging
    BSOD after RAM upgrade: Hello all, A week ago I recieved my order G.Skill Ripjaws V 16GB 2x8GB DDR4 3200MHz C16 F4-3200C16D-16GVKB I had already one pair of the same ram up and running for 2 years. After the ram installation the system recognize only 16GB and the other half appears as system...

  10. BSOD after upgrading RAM and SSD

    in Windows 10 BSOD Crashes and Debugging
    BSOD after upgrading RAM and SSD: I upgraded my RAM from 32gb to 96gb and installed a new 2T SSD on my Dell computer. However afterwards, I get BSOD. I am getting multiple error messages and codes, all of them are BSOD. What is the solution?...