Windows 10: Bsods and freezes when the computer wakes up from sleep

I've been having issues since december 2020 primarily when the computer wakes from sleep.

Sometimes it does not fully wake up, meaning monitors are turned on maybe the lights from the keyboard and mouse but it does not return to desktop.

If i power down the PC hold power 3 seconds and power it back again, the system resumes most of the time - as if it only now wakes from sleep.

I also need to mention that i'm running in dual boot - not sure this is relevant.


Few times after it woke up i got a BSOD. So i followed @ZigZag3143 's guide to create a driver verifier and sure enough bsod each boot. Only i restored the system instead of deactivating the verifier - which for some reason did not restore to my fresh restore point but a previous one so i lost one of the most recent bsods. Following link has 2 bsods msinfo and aida report.

https://1drv.ms/u/s!Aqvqbh_13lBwhrYsBh0XI6Ytl8iv5g?e=XxnnMw


Hardware wise i did not change anything, not even peripherals for ~ one year. I updated most driver, back in december when issues first started and have been updating the video card drivers regularly.


I have only one suspect piece of hardware a Corsair H110i for which i had a hard time to get the software working but which retained the settings i made even after uninstalling. But this worked without issue for a year.


I have OC on my memory but it's the default DOCP. Ran windows memory diagnostic without issues.

:)

 

BSOD due to netadaptercx.sys after waking the PC from Sleep

Hi Prakhar,

The steps you suggested did not solve the problem. I am still experiencing the BSOD when waking the computer from sleep. If you have an other suggestions they'd be greatly appreciated.

Regards,

Chris

 

wake from sleep issue in windows 10

Hi,

Thank you for posting your reply. Apologize for the delay in response.

I suggest you to check which devices are configured to wake up the computer from sleep by following the steps below:

• Right click on Start icon and select Command Prompt (Admin).
• Type the command line below:

Powercfg /devicequery wake_armed

3. Check if the devices (Keyboard, Mouse, Ethernet cable) are listed.

If the system is not going to sleep and going to Hybernate, the only option to wake up is to press the Power button.

Hope the information is helpful.

 

computer wake-up after sleep

Hi Bill,

There's a possibility that the settings that enables your Space bar to wake your computer up from sleep was reset after updating Windows. If this what had happened, we suggest that you just re-set it up. See the steps below on how to do
so:

• Press Windows key and type keyboard in.
• Click on Keyboard option and a pop-up windows should show up.
• From there, go to > Hardware tab > Properties >
  Change settings > Power management > Allow this device to wake the computer >
  OK/Apply.

Try the if the steps did work and let us know any updates.