Windows 10: Built a new PC and have had many BSOD issues that all point to the OS. I have tried many...

I built a new PC a few months ago so I would have a 2nd one for streaming see specs and have had no long term success in solving my BSOD issues. I have 2 fairly compatible PCs so I have been able to weed out potential hardware issues with PSU, RAM, GPU, and M.2 NVME drives. I also sent my mobo into MSI for potential repair and this has not resolved anything. Along with hardware, I have tried the following:> sfc /scannow many times and finds a defect in most cases, but fails to fix any or all of them> DISM commands CheckHealth, ScanHealth & RestoreHealth> Safe Erase of all dr

:)

 

Settings can't be opened using the built-in administrator account


Hello,
Unfortunately I have the same issue as Dabz from upgrading win7 to win10.
I've tried opening settings using all the suggested methods and it will not load using my account with Administrator access nor the built-in Administrator profile. I also tried other methods not listed such as using Run. Control panel is just a stepping stone to add users in Settings.
I'm also having explorer.exe issues, which I believe is preventing Settings from loading.
Using cmd (Admin) I successfully created a new user profile [and granted admin access also using cmd (Admin)], however win10 will not allow this account to log on. win10 does not list this new user within control panel but it does in the start menu. win10 will not allow to log in or switch to the new account via the start menu either.
I can access settings in Safe Mode but this will not allow me to create a new account.
Any help/suggestions will be greatly appreciated.
Cheers

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

BSoDS on newly built PC

Hi!, 3 days ago I built my very first PC, using this build (http://pcpartpicker.com/p/15tmJ) it was all running great but then yesterday I started encountering multiple BSODs that says Memory_Mangement(this is the most common one), IRQL_Not_less_or_EQUAL(only appeared once) and Page fault in non paged area(only appeared once.) What I did was I reformatted my HDD and while installing the OS, during the "windows is expanding" part to be exact I keep on encountering a problem stating that the files are corrupt or missing. Then I did some research and I found out that Removing one of the RAM sticks would do the trick and it actually did. Right after the installation of OS, I put the second stick back on and it started having BSODs to the point that I can only use my pc for like 5 mins at the most before the BSOD occur. So I removed one of the sticks again and to my surprise it aint having BSOD and as of now its been running for about an hour or so without any problem. I am sorry if this is a stupid question but which one do you guys think is the problem, my mobo's RAM slot or the actual RAM card? pls help me. any help is greatly appreciated and thank you in advance!