Windows 10: Can I create a clean USB windows boot with my partially corrupted PC

I had some issues updating my PC to a recent update for Windows 10. I believe the update was interrupted and led to some files becoming corrupted. While trying to diagnose this issue with resetting and troubleshooting I eventually did a reset without deleting personal files to try to remove the issue and attempt the update again.This seems to have made the problem significantly worse as now lots of files are corrupted and have no clean backup to draw from that I know of. I've attempted a DITS and SFC check in safe mode to find this out and there is a large amount of corrupted files so I've be

:)

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

USB clean boot problem

USB media might be corrupt, try creating a fresh copyu.

Step 1: download a copy of Windows 10 you have a license for directly:

Download Windows 10 Feature Update ISO Files Directly Using Your Web Browser

Step 2: Create a bootable copy using Rufus:

Rufus, a small tool you can download for free.




Rufus - credit: Pete Batard/Akeo

After you have installed Rufus:

• Launch it
• Select ISO Image
• Point to the Windows 10 ISO file
• Check off Create a bootable disk using
• Select GPT partitioning for EUFI firmware as the Partition scheme
• Choose FAT32 NOT NTFS as the File system
• Make sure your USB thumbdrive in the Device list box
• Click Start
• Close when complete

Step 3: Perform a clean install using the instructions how to boot from your USB thumb drive:

How to: Perform a clean install of Windows 10

 

Windows 10 USB boot

Hi there, am not a windows 10 expert. I have a pc in the bedroom on windows 10, I messed up the bootloader trying to fix the xp on that system.

System wont boot, trying to repair via win 10 usb installer.

Downloaded the media creation tool to install windows 10 installer on usb stick. Not compatible with a host of usb sticks I have. Tried the usb sticks that others use, but I think they use rufus; as the media creation tool by win 10 does not detect the usb stick.

So quick question, the win10 machine i am trying to repair the bootloader is a win7 upgraded to win10.
If i were to use the usb win10 installer to "repair installation" does the version of the iso downloaded via the media creation tool matter?

There is three options:
Windows 10
Windows 10 Home
Windows 10 N

Also is there a step by step instead of using rufus as I want to try an alternative method of creating a usb win 10 installer. Preferably with more compatibility.

System is a asus sabertooth 990 (r2?) with AMD phenom X 6.

Also is there any other software I can load onto the usb that can repair the bootloader easily?
That would be the ideal alternative. Thanks