Windows 10: Can I retrieve c drive docs via boot menu?

Hi. I am still having trouble with my windows 10 laptop constant going into automatic disk repair, but I have managed to reach the boot menu. I have 6 choices (HDD/SDD, ODD, LAN, USB, Enter setup, HDD Recovery) but what I am looking to do is retrieve my docs from the download folder first. Is there any way for me to access the c drive and retrieve those docs from this menu? I hit f12. I am kind of afraid to do anything else.


Thanks.

:)

 

Can't boot from DVD drive

Is your controller in RAID/AHCI modes? If so, the DVD drive will be listed as a separate device in the list of available boot devices, not as "CDROM". Remember that when setting boot device priority. Otherwise, read the manual to see which hotkey during POST brings up the boot menu that lets you select which device to boot from. Even here, the drive will be listed separately, and not as "CDROM".

 

Maxtor Hard Drive Beep

Maxtor drive beeps

Have a similiar situation using a DiamondMax Plus 8, 20GB Mfg Date 4/15/03. Drive used as a second system drive. Drive is recognized in boot menu but not in drive list. Drive is always connected. Computer started locking up for several seconds at a time. Chkdsk on drives and couldn't find that drive. Removed drive from bay to make sure connections were ok and heard the beeping. Shutdown and restart and never got to windows screen. Restarted several times then saw drive in boot menu and Windows loaded but Maxtor not in drive menu. When recognized in boot menu, computer will start but beeps and is not found.

Tried kicking it real hard but no improvement. Any suggestions?

 

No startup boot menu

Hello Kimoefat,

Thank you for posting your concern in Microsoft Community and welcome to the Windows 10 Family.

As an initial recommendation, I would suggest you to access the System configuration utility and check if the Operating System installation path for Ubuntu exists. To do so, follow the below steps.

• Type msconfig in the search bar and select System Configuration from the search results.
• Select the boot tab in the System configuration console to check if the installation path for Ubuntu exists.

If it exists, next logical step is to check if the boot menu time out has been set to 0, which results in Boot menu not showing up.

The boot menu time-out determines how long the boot menu is displayed before the default boot entry is loaded. It is calibrated in seconds. To change the boot menu time-out, use the Bootcfg
/timeout switch. Valid values are from 0 through 999. You cannot use Bootcfg to set an indefinite time-out.

You can run the following Run command line to set the boot menu time-out accordingly. To do so, follow the below steps.

• 
  Press Windows key + X, select
  Command prompt (Admin) to bring up elevated Command prompt
  
• 
  Type in the following command: bootcfg /timeout 10
  
  timeout 10 will set the time frame to 10 seconds
  

However, if the Boot path for Ubuntu does not exist in the boot menu of System Configuration utility, I would suggest you to check if the Ubuntu is overridden by the Windows installation or if the Ubuntu installation files are corrupted.

Hope the above information is helpful. If you need further information, feel free to write to us and we would be happy to help you.

Thank You.