Windows 10: Can I set different applications using Ethernet or WiFi?

I want my gaming go through Ethernet, which is low bandwidth but stable and low latency. And watch videos and web browser go through Wi-Fi.

My Wi-Fi and Ethernet are not at the same router.

Is it possible to do that?

submitted by /u/Peanut_John
[link] [comments]

:)

 

WIFI Works, Ethernet won't

OK but why?

NOT YELLING, JUST EMPHASIZING

Please note, I installed the new Lynksis, it worked just fine for 3-4 days on both my MACBOOK PRO when in ethernet connect and the Dell, then the ethernet just quit working for both my MacBook Pro and Dell desktop. It did work, then just quit for no apparent reason. WIFi for iPhone, iPad, Andriod Phone, and when I set to wifi for my MacBook pro all work fine.

Detailed history: I first noticed that on my Desktop dell that is CAT5 ethernet connected to the WIFI ROuter, that it stopped, no internet access. I began to trouble shoot, and turned off my WIFI on my MAcbook and it wouldnt work either, plugged into same router but different cat5 cable. At that time, all WIFI devices still worked. I figured that it must be the ethernet side of the WIFI router, so I replaced the router with brand new one. the Lynksys N900 listed in original thread. Ethernet and everything worked just fine for 3-4 days. But then ethernet quit, but wifi still works.

Whatever the problem, it affects both my MacBook Pro and Dell with WIN 7. I'm guessing it is NOT a computer problem, if it is it is affecting both my Mac and Dell, separate cat 5 cables to same wifi router

To remixedcat, I don't know for sure how to check IP settings, see above post, no damage apparent to anything.

 

IP configuration not valid - interference from ethernet adapter?

Solution 1: No Internet Access In Windows 8.1or Windows 10

Step 1:

Go to Device Manager → Network adapters.
Step 2:

Expand it (Network adapters).


Step 3:

Select your network adapter


Step 4:

Right click on your wireless network adapter or Ethernet adapter and then tap “Update Driver Software”.
(in this case your network adopter is Ethernet adopter so tap your Ethernet adapter)
Step 5:

Now on a new window you will need to click on “Browse my computer for driver software”.




Step 6:

Then select “Let me pick from a list of device drivers on my computer”.



Step 7:

Now choose the “Manufacturer’s drivers” from the list of two and then click next.



Step 8:

After the completion of the process just restart your PC and check if the problem is solved or not. If not, goto solution 2.



Solution 2: No Internet Access In Windows 8.1,windows10

Step 1:

Open command prompt.
Step 2:

Just go on hitting the enter after typing the each command.
netsh int tcp set heuristics disabled
netsh int tcp set global autotuninglevel=disable
netsh int tcp set global rss=enabled
Step 3:

Now to check if the settings are disabled type:
netsh int tcp show global
then hit enter.
Step 4:

Now the thing left is just rebooting your system and just check if the problem is solved or not and just give feedback.*chuckle*Thumbs

 

Make Windows 10 connect/disconnect to WiFi based on Ethernet connection status

Steps:

1. Go to Control Panel\ All Control Panel Items\ Network and Sharing Center > click on 'Change adapter settings' then use the 'alt button' to show menus and select Advanced Settings...
   
2. Under Connections section, select Ethernet, and use the arrows to the right to move Ethernet above WiFi.
   
3. Click OK.
   

Windows will now prefer the Ethernet over the WiFi for connecting to the internet. This should apply for Windows 8, 8.1, and 10.