Windows 10: Can not connect to local port

HiWe can not connect to some local ports on device. Below are all connections from one device to itself. What is the problem? Firewall is off.C:\ipconfig find "Address" IPv4 Address . . . . . . . . . . . . . . . : 172.16.235.233C:\C:\netsh advfirewall set allprofiles state offOk.C:\netstat -na find "135"TCP 0.0.0.0:135 0.0.0.0:0 LISTENINGTCP [::]:135

:)

 

Local account installation question

I'm fairly certain that Skip this step was available in 10.0.130 - the workaround in Step 20 (back button) is no longer required.

The currently known, as of 10.0.130, ways to create a Local account sign-in are

• Skip this step at the MS account creation phase
• No Internet connection during the install
• static IP (post# 2 by Fragment) - New (to me anyway)

 

Missing field Connect using in Local Area Connection Properties

Have you tried uninstalling the Network Adapter? Since there is no properties in the Local Area Connection, we suggest that you uninstall the Network Adapter. Follow the steps below:

• Press Windows Key + R.
• Type devmgmt.msc.
• Right click on the Network Adapter.
• Select Uninstall.
• Select Ok.
• Select Scan for Hardware changes.

Update us on the results.

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".