Windows 10: Can not reinstall windows 11 after regular bsod critical process died errors over some...

I bought my first pc around 2 months ago. It's a asus prime b520m-k mobo, 4060 gpu, amd ryzen 5500 cpu, 2tb western digital m.2 ssd, 32gb ram crucial. The pc originally came with 16gb ram and 500gb adata legend ssd. I changed the ssd first to the one noted at the beginning. Since then I got the odd bsod critical process died screen. Every now and again it would go into a loop of critical process died on booting. Sometimes it was around 30 seconds to 1 minute after logging in. I would follow some online steps to run sfc can now, dism check, check disk checks, ram checks, all showed up OK. When

:)

 

BSOD Critical Process Died


This is my config, what should i do? - - - Updated - - - I tried also this: Step 1. From the initial Windows screen, accept the default settings for the language to install, the time and currency format as well as the keyboard or input method. Next, click the Repair your computer link instead of Install now. choose Repair your computer Step 2. Select Troubleshoot and then Advanced Options. Step 3. Select Command Prompt. Step 4. Type diskpart and press Enter key. Step 5. Type list disk and press Enter. Now pay attention to the disk number and identify which one is the boot disk. Usually, it is Disk 0; if not, find the disk number in your own case and remember to type the correct one in the following relevant steps. Step 6. Type select disk 0 and press Enter. Step 7. Type list volume and press Enter. Now pay attention to the volume number of the EFI partition. Step 8. Type select volume N and press Enter. Also, type the one in your own case instead of N. Step 9. Type assign letter=N: and press Enter. N: can be replaced by any drive letter that is not taken by any partition. Remember which drive letter you assign here for it is rather useful in the rest steps. Step 10. Type exit and press Enter to leave diskpart. Step 11. Now type N: (the drive lettered you just assigned) and hit Enter. Step 12. Type format N: /FS:FAT32 and hit Enter. Step 13. Type bcdboot C:\windows /s N: /f UEFI and hit Enter. Now repeat the process of running the bootrec /fixboot command, bootrec access is denied Windows 10 should be solved now. But if fixboot access is denied occurs on an MBR disk, continue with Fix #2. All steps until 13. was executed successfully, but still became on bcdboot /fixboot Error: Access is denied. And I have a GPT and no MBR Partition bootrec /rebuildbcd was successfully, founded Win installation: 0 (ZERO) complete bootrec /scanos found also ZERO installations

 

BSOD Critical Process Died

Sorry for late reply, but I was busy... So here are the pictures:













- - - Updated - - - Additional information, my SSD has been checked several times and has no errors/problems and works 100%. And unfortunately I don't have any backups except for a copy from the already broken Windows drive.

 

critical process died

Hello,

Please try suggestions mentioned here:

[FIX] CRITICAL_PROCESS_DIED BSOD In Windows 10

Hope this helps, Good luck