Windows 10: Can RAMDRIVE WINPE format local hard drive?

I have a winpe vhdx ramdrive.After setup the system reboots to it without issue.A network path is then used to automate formatting and building a fresh OS.This fails and the system BSODs.I have tried also running diskpart from the winpe ramdisk and cleaning the drive. This also results in the exact same BSOD.Stop code: FILE

:)

 

want to Format a La Cie External Drive Because the Software Genie 9 has too many versions of backup.

Hello,

To format an external USB or an external hard drive you can easily do it by accessing Computer Management. For us to assist you, we suggest that you follow the steps listed below:

• Press the Start button.
• Type Computer Management.
• On the left side, click on Disk Management under Storage.
• Locate the drive that you want to format.
• Once located, right-click on the drive and choose Format.

If the hard drive has not been formatted with the steps that we have provided above, we recommend that you contact the manufacturer of your hard drive. Some hard drive requires a software that you'll need to use just to format it.

Let us know how it goes and if you need further assistance, feel free to post back.

 

How To Format A Write Protected Flash Memory ?

¿You already tried this one?...

Run CMD


1. diskpart
2. list disk

Then in the 3º step, put the correct number of disk in the list for the usb flash (if it's listed in disk 3, then you'll have to write select disk 3).

2. select disk #
3. clean
4. create partition primary
5. select partition 1
6. active
7. format fs=fat32
8. assign
9. exit

with that commands you will format the flash drive in fat32, if you have a large drive you can select also "format fs=ntfs" in step 7.

good luck!

 

Formatting a dual boot system with windows 10 and ubuntu

Hi,

In Windows 10, you can easily format a hard drive or a partition by accessing Computer Management. For us to assist you, we suggest that you follow the steps listed below:

• Press the Start button.
• Type Computer Management.
• On the left side, click on Disk Management under Storage.
• Locate the drive that you want to format.
• Once located, right-click on the drive and choose Format.

If the hard drive has not been formatted with the steps that we have provided above, we recommend that you contact the manufacturer of your hard drive. Some hard drive requires a software that you'll need to use just to format it.

Let us know how it goes and if you need further assistance, feel free to post back.