Windows 10: Can someone direct me with instructions

In my taskbar there is a line in the middle of the apps. When you point the mouse at the middle of it, you will not be able to click the application but you can click if you point in the image of the apps itself. When booting you will not be able to use it as well. Im using 2 monitors and it is showing there on both monitor so it is not hardware. Please help me and direct me in right path.

:)

 

Instructions to change board?

Boot off of the windows CD, repair your XP partition (hopefully you won't have to reinstall windows), install drivers, and you're good to go. You'll see dual channel mode in the BIOS splash screen results from POST. It'll be pretty obvious *Stick Out Tongue . Here's a list of general tweaks for the 939Dual-SATA2.
Step one- Set time, date
Step two- In CPU settings, disable cool n quiet, set memory clock to DDR400, play with memory timings (CAS-TRAS-TRP-TRCD), which are listed in the bios in the order CAS, TRCD, TRAS, and TRP. EDIT- new BIOS's mess around with this order, can't be too sure on it, but yeah at least you know what the RAM timings stand for *Big Grin .
Leave MA timing at 2T unless you think your system can handle 1T
Step three- in Chipset settings, enable onboard LAN, disable onboard Audio, disable AGP fast write, set primary graphics adapter, and set CPU-NB and NB-SB link speed to 1000mhz.
Step four- in IDE, disable controllers you aren't using. On all drives detected, enable SMART if you can and set PIO/DMA as high as they will go.
Step five- Enable legacy USB support
Step six- Set password if you're worried about anyone screwing around with your BIOS settings
Step seven- Configure your boot sequence. I reccomend hard drive first, optical drive second, and floppy drive third.
Step eight- Save changes, boot into XP, and enjoy your computer.

 

Windows 10 shows Direct x 12

Hi Jagdishservi,



Thank you for posting your query in Microsoft Community.

I apologize for the inconvenience caused. We are glad to help you.

• 
  Where have checked for the version of Direct x?
  

I suggest you to follow the below steps and check:

• 
  Press Windows + R keys together.
  
• 
  Type dxdiag in the run prompt and hit enter.
  
• 
  Now check for the version of Direct x.
  

Hope this information helps. Do contact us with the updated status of the issue. We will be happy to assist you.



Regards,

Jenith

 

Random Restars - > Video Card - > PSU

i try but find no info. itd help if someone explained it.. tbh.