Windows 10: Can someone tell me what I'm doing wrong?

submitted by /u/criticalbandana
[link] [comments]

:)

 

No Boot, Drives Not detected, Can't Load Win10 Pleses Help!

Until the BIOS sees your M.2, there's nothing you can do. It does not matter if the M.2 is unformatted/unallocated, the BIOS should see it.

1. Suggest that you take the M.2 out, clean all the contacts and re-seat it and hope this is the case.
2. If step one fails. Connect your 250GB SSD back in using one of the SATA port to see if the BIOS recognize it. If it doen't, then it might be something wrong with the MB, if it does then boot up the Windows Installation USB, run diskpart, shrink it at least 40GB then create a partition, Leave it unallocated then install Windows there.

Also try to re-seat all other components such as Memory, Video card etc...

 

Pentium M

Not sure what I'm looking at. Though when I do go to Options and then CPU it lists my CPU
as Intel Pentium M processor 1.73 GHz, and then under that it lists speed: 799.9 MHz
and then features and cache size.I ran the benchmark test and don't understand all
those numbers, but while testing I checked CPUZ and it still says it is running at 800 MHz.

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.