Windows 10: Cannot add a Bluetooth device

I cannot connect to my WH1000XM$ Sony headphones to my Dell XPS laptop. Now no Bluetooth devices are seen during the add process. I've had two premium Dell support sessions but no insights were developed. In the first one, the BIOS was changed. In the second one, the defaults were restored. Some updates were performed. Earlier I had failures with seeking the cause of a hibernation problem that caused startups to require numerous power switch attempts. Later I discovered that hibernation in airplane mode is necessary to prevent these problems. I haven't had such problems with my employer-owned

:)

 

Bluetooth Technology Gets Faster With Bluetooth 3.0

From its annual All Hands Meeting in Tokyo this week, the Bluetooth SIG formally adopted Bluetooth Core Specification Version 3.0 + High Speed (HS), or Bluetooth 3.0. This latest iteration of the popular short-range wireless technology fulfills the consumers' need for speed while providing the same wireless Bluetooth experience – faster. Manufacturers of consumer electronics and home entertainment devices can now build their products to send large amounts of video, music and photos between devices wirelessly at speeds consumers expect.
Bluetooth 3.0 gets its speed from the 802.11 radio protocol. The inclusion of the 802.11 Protocol Adaptation Layer (PAL) provides increased throughput of data transfers at the approximate rate of 24 Mbps. In addition, mobile devices including Bluetooth 3.0 + HS will realize increased power savings due to enhanced power control built in.


"Like Ricky Bobby in Talladega Nights, this latest version was 'born to go fast,' said Mike's Blog, Ph.D., executive director of the Bluetooth SIG. "Utilizing the 802.11 radio was a natural choice as it provides efficiencies for both our members and consumers – members get more function out of the two radios they are already including in devices, and consumers with Bluetooth 3.0 + HS products will get faster exchange of information without changing how they connect. We are excited to expand the possibilities of the PAN."

This newest version of Bluetooth technology builds on the inherent qualities of the current 2.1 + EDR version, including Simple Secure Pairing and built-in, automatic security. And as with all versions of theBluetooth specification, v3.0 + HS provides developers, manufacturers and consumers with the benefit of backwards compatibility, enabling both the expansion and enhancement of this technology with every new specification release. Once products reach the market, the easiest way for consumers to learn which devices are compatible with other Bluetooth enabled devices is to visit the Bluetooth Gadget Guide.

Applications
With the availability of Bluetooth version 3.0 + HS, consumers can expect to move large data files of videos, music and photos between their own devices and the trusted devices of others, without the need for cables and wires. Some applications consumers will experience include:

• Wirelessly bulk synchronize music libraries between PC and music player or phone
• Bulk download photos to a printer or PC
• Send video files from camera or phone to computer or television

Availability

The Bluetooth SIG's formal adoption of the specification is only the first step in the product lifecycle. News out today from wireless chip manufacturers and Bluetooth SIG member companies Atheros, Broadcom and CSR shows the second step – getting silicon solutions to device manufacturers – is already underway. End products for consumers are expected to be in the market in 9 to 12 months.

Technical Specifications
This new specification release includes several major enhancements (learn more here - page requires member login):

• Generic Alternate MAC/PHY (AMP)
• 802.11 Protocol Adaptation Layer (PAL)
• Generic Test Methodology
• Enhanced Power Control
• Unicast Connectionless Data

Source: Engadget

 

Bluetooth device is shown as not present.

Hello Dominika,

Thank you for getting back to us. Since the issue still persists after following the steps on the article above, we'd like to know more. Kindly answer the following questions:

• Did you checked whether the Bluetooth device is listed under hidden devices in Device manager?
• What is the make and model of your Bluetooth device?
• Can you tell us the specific bluetooth devices that you're using on your Windows 10?
• Have you checked whether the Bluetooth driver is listed under installed programs under Programs and features?
  

Meanwhile, we suggest that you check if the Bluetooth services is enabled by following the steps below:

• Press Windows + R keys on the keyboard, type services.msc and press OK.
  
• Right click on Bluetooth Support service and select
  Restart.
  
• Right click on Bluetooth support service and select Properties
  and check if the startup type is Automatic.

We'll be waiting for your response.

 

Cannot use bluetooth device

1 Pairing is done in Settings, Devices
1.1 You click on Add Bluetooth or other device
1.2 You choose Bluetooth
1.3 If there is a pairing button on the bluetooth device itself then you press that now. You need to check the instructions for your bluetooth device to see how to do this - several automatically go into pairing mode when they switch on, others have a button that needs to be pressed for, say, 5 seconds.
1.4 The computer detects all available bluetooth devices and you select yours from the list. If yours is not on the list then Windows could not detect it.
1.5 It connects - pairing includes connecting
1.6 The computer sounds a buzz in the earpiece then displays Your device is ready to go and you click on Done
1.7 The device is shown in the devices list below the subheading Audio and it shows it as connected
1.8 The device should also appear in Control panel, Sounds, Playback tab
1.9 The device should also appear in Control panel, Devices & printers
1.10 {I just paired some bluetooth earphones as I typed so I could make sure these notes were correct} You use a music player and the sound comes out of the bluetooth earphones

2 If this is not happening for you then go to Contol panel, Devices & printers
2.1 Right-click on the device & select Remove device
2.2 You can now try pairing from scratch again
2.3 Several other users have reported that only removing the device with Bluetooth command line tools - BluetoothInstaller allowed them to re-pair again [see xzion's guidance below]
2.4 Yet others reported that only the KeithM code or Bungee's guidance worked for them [see below]

3 Where is this all going wrong for you?
[I assume we are definitely talking about bluetooth headphones/earphones. I understand that WiFi ones do also exist.]


4 Additional guidance -

Unpair a Bluetooth Device - TenForumsTutorials
Connect a Bluetooth device in Windows - Windows Help

Steps to completely remove a belutooth device so pairing can be done again [post #9, xzion] - TenForums
Steps to completely remove a belutooth device so pairing can be done again [post #22, KeithM] - TenForums
Steps to completely remove a belutooth device so pairing can be done again [post #39, Bungee] - TenForums
Several people registered in TenForums just to be able to thanks xzion, KeithM & Bungee. Apparently, what worked for some people did not work for others so each solution seems worth trying.


Denis